1996 Suzuki VS 1400 Intruder "having shifting problems bleeding clutch" Questions

...problems! My sibling had it in the garaqe for a while. I rehabbed the fluids and had been riding it well when it became very difficult to shift from 1st to 2nd. ( I would have to double clutch) Also, ...

idles great...all 4 cyclinders are firing...shift from neutral into gear...engine shuts off if it kind of jumps could be a clutch cable or actual clutch problem.try adjusting ur clutch cable to be a ...

...having difficulty downshift. I can shift up but gears "sticks" when shifting down. any advice? If the problem started after a flush I would definitely re-bleed the system. I personally prefer to use ...

...clutch in and start the bike. Other Problems.'. You may have an airlock in the clutch line Take it to dealer and have it bled or get a knowledgable person to help you bleed the line. Is your battery ...

almost immediately when you squeeze it.  If very little or no pressure is felt and it is a hydraulic clutch, it may need bleeding or it has a bad master cylinder or slave cylinder. 

...bleeding. Instead the first part of the pull feels free, then the clutch engages with almost no slip, then the rest of the pull feels normal but doesn't do anything. Unfortunatly my dealership closed ...

I have a 98 1500 Nomad and have lost drive power twice after a long ride. The gears seem to shift well in the beginning and continue for a couple hours. I will stop and take a break for 30 Min - 1 hr ...

...bleeding it since this is the cheapest and easiest to do, and the most likely cause in my experience. Also bear in mind that you may have all 3 of these problems, although it's not likely, especially ...

have zl 900 1985 model clutch slips bad replaced clutch and fluids everything apears fine new clutch acts the same way trans shift thru all gears fine acts like clutch cable to tight but its hyd ...

...shifting from 1st to 2nd, and neutral to 1st. Also, when downshifting, you can feel it pull with the clutch lever pulled in (as though the clutch isn't fully disengaging). It has a hyd clutch and is ...