Question about Suzuki VS 1400 Intruder Motorcycles
...clutch lever), you should get a good flow of fluid with one press. If it barely releases anything, tear the cylinder down and check the outlet area and piston valving. It may need a rebuild kit or ...
Question about Suzuki VS 1400 Intruder Motorcycles
...rebuild the master do this first and then eliminate the master and the slave ..I hope this will save a lot of time and give you more time to safely ride your bike .It took me quite a while to figure ...
Question about Suzuki VS 1400 Intruder Motorcycles
...I'm stymied. Change the fluid in the clutch reservoir,bleed out the remaining fluid.(keep it full as you go) Should be dot 4 fluid not dot 3. U may need to rebuild the master cylinder or replace
clutch will not bleed I had the same problem...FIX...with these bike you need to bleed the master cylender first. The way to do this is to fill the resevior and but the cap back on,pump the handle ...
Question about Suzuki VS 1400 Intruder Motorcycles
...cylinder up at the handlebars, place the tube over the end of the bleed valve (after loosening it a turn or two. Place the other end of the tube down in the break fluid in the jar. Work the clutch ...
Question about Suzuki VS 1400 Intruder Motorcycles
rebuild clutch slave cylinder Please visit this site and you will get the general idea on the clutch slave cylinders. http://www.fjparts.com/clutch_slave_cylinder_diagram.htm This site for parts:-http
...master cylinder master cylinder for clutch dried up,slave cylinder still wet, how much trouble to rebuild master cylinder? This is on a 650 Night Hawk 1983 u don't rebuilt these you replace
...or slave cyliinder not working rebuilt master still no pressure at bleeder port can someone tell me how to get the clutch to work If a rebuild did not work, it may not be rebuildable. Buy a new
...clutch dried up,slave cylinder still wet, how much trouble to rebuild master cylinder? This is on a 650 Night Hawk 1983 Why do you think you have a problem with the master cylinder. If it is dry it ...
Question about Suzuki VS 1400 Intruder Motorcycles
...clutch master cylinder or throw out bearing or something else? Car = 99 honda accord coupe ex (4 cylinder) You will need to rebuild or replace both the master & slave cylinders. Then bleed like a ...
188 questions posted
Usually answered in minutes!
52 Questions
34 Questions
34 Questions
29 Questions
30 Questions