Question about Suzuki VS 1400 Intruder Motorcycles
...ticking sound ((at idle))and popping or backfiring on deceleration). When automatic cam chain adjusters are going bad you get a clicking sound, or worse, hydraulic valve lifters (for zero tolerance) ...
...adjusted. A ticking sound on the top end is almost always the valves tapping. I slight ticking sound is normal but if it's been sitting for a while it's good to have them measured
Question about Suzuki Motorcycles
...ticking sound? Bike starts and runs well. just hearing a slight ticking sound It is normally Tappet Tick. The valve lifters need a bit of a tighten up. Google has lots of videos. ...
...ticking sound is most likely caused by uneven wear on the cam lobes. The next time you've got the valve covers off, take a look at the cams and you will likely see scuff marks on one or more of the ...
Question about Triumph Motorcycles
...ticking sound coming from cam cover area. Increases with throttle and stops on deceleration. Any ideas? Valve tappets. Not sure if they are hydraulic - self adjusting or not. You aren't alone, this ...
Question about Suzuki VS 1400 Intruder Motorcycles
ticking sound. At first I thought perhaps the cooling fan had siezed up over the winter, but it seems to be fine. I started listening closer and it appears to be comming from just under the fuel tank.
...ticking sound that seems to come from the rear drum or somewhere in that vacinity. Someone suggested that a rear brake pad could have come loose. V-star had problems with loose pads on the 1300. So ...
ticking sound in engine i just purchased a 2006 HONDA VT750 Aero i just runs good except for a ticking sound could it be valve trouble? Have the valves adjusted at the proper interval. Sounds lilke a ...
Question about Motorcycles
...ticking sound? I have a 2009 Yamaha YZF R6S and whenever I started a neutral and throttle there's a ticking sound that comes from either the oil Pan or exhaust just wondering if anybody could help me ...
ticking sound in the valve train. i have changed everything in the valve train but the noise is still there, when the engine is ideling it is very loud, and when im around 2500 rpms i can hear louder.
188 questions posted
Usually answered in minutes!
52 Questions
34 Questions
34 Questions
29 Questions
30 Questions