2002 Suzuki VL 1500 Intruder LC "engine" Questions

...2. Switch on the power. 3. Do NOT touch the throttle. 4. Press the "Start" button and crank the engine a little (1 - 2 seconds) 5. Do NOT touch the throttle. 6. Keep cranking the engine (another

Loosing torque when engine heats up..... feels like clutch is not engaging even though in gear. Bike runs fine for the first 10 minutes or so, but as soon as engine oil heats up, bike is no longer ...

motorcycle starting problem engine turns over but wont start For an engine to run, you must have spark, air and fuel. If you have spark at the proper time (it was running - nothing changed, right) you

the engine start but stop when is ascelerated this is a 2002 suzuki vl intruder 1500 it was in a garage for 1.5 year without start the engine let me know that to do New fuel, new oil, and rebuild the ...

location of stator In the left engine side cover, and under the magneto. Follow the wires that go into the engine. 

2000 Suzuki vs800GL Intruder Engine stumbles The engine stumbles and pops when opening the throttle at low rpm If you use a High octane gas, this may happen on the VL1500, You should only use regular ...

...to change transmission fluid The VL1500 has a integral gearbox, it uses the same oil supply as the engine. Once you drain the engine oil you will be changing the gearbox oil. Suzuki's are not like ...

...having trouble locating the oil plug or plugs. Can anyone help??? Remove the right side rear engine cover and you will find the where you pour in the new oil. Look toward the rear of the bike ...

...if it's working properly. if not... try setting the idle screw on the throttle body when the engine is hot, unscrew the screw to get the desired idle speed, then let it cool (fully cool) and ...

above s/l.) The bike starts ok but doesnt run smooth when operating at working temp. If I choke the engine slightly, it runs strong and without a splatter and backfire. I suspect the engine is running