Hi i have just baught a gz 125 y marauder only to find that the cable for the rear brake is sticking, which is keeping the rear brake pads pushed against the drum. Will i have to buy a new cable and ...
Rear brake sticking i've just been given an 2003 GZ125 Marauder, its been stood for a couple of years in my dads garage it started easily enough and seem more or less sound however the rear brake is ...
Rear Tyre For 2005 Suzuki Marauder 125 Does anyone know where I can purchase the rear tyre for this bike? I have been searching and searching for ages, but it appears that tyres to fit this bike are ...
...with the standard tyres that it had fitted from new then: Single rider: Front is 1.75 bar (25 PSI) Rear 2.0 (29 PSI) Fully loaded (Panniers and or pillion passenger) Front 2.0 bar (29 PSI) Rear 2.25 ...
...costa rica. Good reliable info and maintanence is hard to come by much less available manuals. My rear whell is adjusted all the way back and the chain is still too loose. The sprockets still look ...
...all modern suzuki use a normal rh thread for tightening. put the bike in gear press down on the rear brake and undo in the normal direction anti clockwise, check there are no locking tabs bent ...
...worn, the teeth become pointed and the chain does not sit correctly on the drive chain wheel on the rear wheel, (i.e. there is a gap between the chain and the inside edge of the driven sprocket. If ...
...revving the engine, leaning forward slightly and then dropping the clutch. Be sure to cover the rear brake with your right foot as it will keep the motorcycle from flipping if you give it too
Question about Suzuki GZ 125 Marauder Motorcycles
Cant remove rear seat on my 2004 Intruder 800 Can not remove the rear seat. I take it you have removed the rear bolt holing the rear of the rear seat to the body of the bike. The rear seat is then ...
Question about Suzuki GZ 125 Marauder Motorcycles
re assembling rear ABS sensor. No rear brakes. re assembling rear ABS sensor. No rear brakes. Rear brake pads are fairly new. Rear rotor gets hot, but does not stop or even slow the bike. abs pump not
86 questions posted
Usually answered in minutes!
28 Questions
17 Questions
4 Questions