...speed top end dropped by 15-20mph tyre pressure is big one so easy to check so common not to also checking your chain is tight enough but can still move 1-2cm this will cause low power at takeoff and ...
...top end speed is supposed to be 65mph.. Any ideas what the problem could be? A plugged up main jet in the carb could be the problem. Remove the float bowl and clean the carb. I prefer removing the ...
Question about Suzuki GZ 125 Marauder Motorcycles
TOP SPEED THANKS. To improve top speed,one solution is to change your gearing, via the chain and sprocket set up. To gain more top speed, you need to replace your rear sprocket with a smaller one, say
...top speed?? mine did 76mph and i used Shell V-power but i weight 12stone so if your less then it will make a differance 70-80mph a yzf r 125 top speed is 78mph 80 at the max 2008 Yamaha YZF-R125 has ...
Question about Suzuki GZ 125 Marauder Motorcycles
...TOP SPEED OF A 05 VL800 The power commande will encrease horse power if you have done high flow pipes and air cleaner. You don't need to increase top end speed, she's is more than fast enough to get ...
...top speed problem. It only reaches top speed of 70 km/hr. During its top speed, the engine was like choking or like a car that has speed limiter that achieve it top speed. What could caused the ...
Question about Suzuki GZ 125 Marauder Motorcycles
top speed what can be wrong when my Yamaha xjr 1200 missis when driving and looses power on top speed? Check all -FUEL SYSTEM Carburetors Faulty diaphragm Incorrect fuel level Loose or closed main jet
Question about Suzuki GZ 125 Marauder Motorcycles
...top end speed wanted for suzuki ltz400 year how can i gain more top end speed for my suzuki ltz400 Either put a 4 to 8 tooth smaller rear sprocket on the bike or put a 1 to 2 tooth larger front ...
Question about Suzuki GZ 125 Marauder Motorcycles
...top speed of a 2002 Honda CR250R 2 stroke? The only figure I could find was 70 mph. But from all the research, what the bike is known for is power and reliability. It is also extremely strong and can ...
top speed install a larger front sprocket and a smaller rear sprocket. Divide the rear sprocket teeth by the number of teeth on front sprocket e.g 48/14 = 3.43 a lower number means higher top speed 45
86 questions posted
Usually answered in minutes!
28 Questions
17 Questions
4 Questions
