...and less bog but get more spped with the power and i dont want to borre it out can put a larger sprocket on back or smaller sprocket on front. will gain low end acceleration but may loose top end ...
Question about Suzuki RM 125 Motorcycles
what about if i open the exhaust to reduce the backpresure should it run faster Details ha ha i tried every thing the only thing that works change the sprockets front
Question about Suzuki RM 125 Motorcycles
front new topend rebuilt carberater and new sprocket 13 teeth and new air filter barings back and front and brake calipers front and back it can beat a crf 150 but will it beat a 125 rm That is a hard
Question about Suzuki RM 125 Motorcycles
...front sprocket. This will mean the bike will have a lower top speed but more torque and earlier powerband relative to mph speed. Bottom line is you will come out of the hole quicker with higher revs ...
...sprocket up front. Once this is aligned, tighten the smaller nuts snug, then proceed to torque down lightly maybe 10- 20 ftlbs. now spin the tire to check your slack in the chain did it move on you? ...
Question about Daelim Motorcycles
...front sprocket should I use to increase acceleration? fed up not being able to bolt at lights :D Chains and sprocket kits for your motorcycle - DAELIM 125 ... ...
...front sprocket bolt..rear axle nut..front calaper bolts ...thanks Axle nut 145 Nm rear sprocket nuts B and C models 74 Nm rear sprocket but E and F models 59Nm front sprocket nut 125 Nm front caliper ...
front sprocket To replace the front sprocket follow the chain to the cover on the left side and remove it, loosen the chain tensioners on the rear axle, slide rear wheel all the way forward and remove
Question about Suzuki RM 125 Motorcycles
...front sprocket on. On the right side of the bike, you'll see the rear brake master cylinder. The master cylinder must come off as well as the plate that the master cylinder sits on. To get this off, ...
...front sprocket is more cost effective and easier to do. The front sprockets are about $10-$20 and rears are normally around $40-$50. Usually 1T gearing changes made to the front sprocket are the ...
440 questions posted
Usually answered in minutes!
42 Questions
35 Questions
1 Questions
2 Questions