...and front side of carb its fuel/air,to lean turn screw clockwise,if its between backside of carb and air box/filter,its air/fuel,turn screw counter clockwise to lean,adjust with 1/8 turn at a
Question about Suzuki VL 125 Intruder LC Motorcycles
...Screw (Air/Fuel Mix): The idle screw, also known as the pilot screw, adjusts the air/fuel mixture at idle. It affects the fuel flow from the pilot jets (idle jets) into the carburetors. Locate the ...
...air screw sets the fuel mix at idle speed. The stock setting is 1.5 turns outward. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each ...
Question about Suzuki VL 125 Intruder LC Motorcycles
...air screw. idle will increase so keep adjusting idle back to spec.after each turn if needed. Adjust about 1/4 to 1/2 turn at a time on each carb until there is no change in idle, then richen up ...
...air/fuel screw on a suzuki vs 800 intruder The air/fuel mixture screw on a Suzuki VS800 Intruder is typically located on the carburetor. To adjust the air/fuel mixture, you'll need to locate the ...
31 questions posted
Usually answered in minutes!
29 Questions
28 Questions
10 Questions
2 Questions