valve settings for rmz 250 what are the settings for a 2004 rmz 250 because I have looked but cant find the settings on the internet Exhaust Power valve setting for stock is: 1/2 turn out from closed.
rmz 250 04 model wont idal or kick start i have a suzuki rmz 250 2004 model and it wont idal and will only roll start when you ride it unless its full noise it wants to stall any ideas?? Like I told ...
08 suzuki rmz 250 backfires i have checked the valve clearence and they check out fine. what else do i need to run through to fix the problem? timing and fuel/air mix
how much oil does a 2004 rmz 250 take? hi mate fill it until the sight glass is 1/2 - 3/4 full or if there is a dipstick fill it to the correct requirements on the stick
Question about Suzuki RM-Z 250 Motorcycles
i have a lot of oil blowing out the over flow tube it will blow all of it out its a new 04 rmz 250 sounds like you may have broken rings and it pressurised the sump and blowing the oil up the tube
why would the rear break seiz up on a rmz 250 dirt on disc/dirt in the caliper take the caliper off and clean it with a wire bruch and get back to me
was given 2006 rmz would not start so checked spark has spark has gas and oil so looked on line and read it might be valve troulbe so i all so jump stated it no luck did not try to hard it was only ...
250 RMZ engine torque specs. what do you need to know? head barral is 38nm and cam carriers are 10nm most 6mm nuts and bolts are 10nm. hope this helps.
Question about Suzuki RM-Z 250 Motorcycles
I've got an 2010 rmz 250 runs fine when cold and I've got an 2010 rmz 250 runs fine when cold and idle is fine but when warm as soon as you give it abit it just splatters an coughs heaps any ideas
93 questions posted
Usually answered in minutes!
60 Questions
0 Questions
2 Questions
1 Questions