start Bike has petrol and battery good. Turn on ignition and all looks good. SIdestand up, bike in neutral, clutch in. Press starter and nothing other than a faint click. Has happened once before at a
bike ignition turns on when start button pressed nothing happens battery seems ok. all lights on dash go out once the button is released goes though startup as if the ignition as just been turned on.
Question about Triumph Daytona 675 Motorcycles
...bike will start in gear with the clutch lever out. i dont understand, the bike shouldent start in gear with the lever out it would jump forward when you hit the start button.. there is nothing wrong ...
start the bike. Othen than that, all you have to do is make sure its turned on and it should start. Some bikes use a key to turn it on, others have a throttle control switch. We had Suzuki Quad racers
Question about Triumph Daytona 675 Motorcycles
...bike won't start 2001 ZX12R ,neutral light off but motor is in neutral , bike won't start . Push start works and engine runs smooth,but after switching off engine it's the same problem Check your ...
Question about Motorcycles
...WILL NOT COME ON AND BIKE WILL NOT START NEUTRAL LIGHT WILL NOT COME ON AND BIKE WILL NOT START EVEN THOUGH IT IS IN NEUTRAL. sounds like you have a ignition problem, or could be a bad neutral ...
Question about Triumph Daytona 675 Motorcycles
...START BUT BIKE WAS IN NEUTRAL The neutral safety switch is out of adjustment. Most bike won't start unless it is in Neutral or the clutch lever pulled in. Get a new battery and charge it up full. The ...
Question about Triumph Daytona 675 Motorcycles
...bike is in neutral, it should start without using the clutch. If it starts, let it run until it's warmed up and check to see if that frees up your clutch. If still no start, you have a mechanical ...
...start the bike. If the bike is in gear with the side stand down, the bike cuts off all ignition. If the clutch isn't pulled in, the starter won't engage. Check all these safety interlock ...
Question about Motorcycles
...the gear lever up one until the bike moves freely backwards and forwards. Your bike should then start. It would be easier to identify any problems if you let us know the make and model of the
28 questions posted
Usually answered in minutes!
15 Questions
13 Questions
1 Questions
0 Questions
1 Questions