1990 Yamaha FZR 1000 "cable sticking throttle" Questions

...cable is not sticking, there is plenty of free play, and the choke cable appears to be working fine as well. i have a 1991 fzr1000 and it has an erratic idle very low and the revs stay high before ...

...cable is not sticking, there is plenty of free play, and the choke cable appears to be working fine as well. Hi .......Is it a high milage motor with worn slides or maybe the carb rubbers are letting ...

sticking when you give it gas Make sure the throttle stop(the little star wheel under the right handlebar control) isn't tightened against the throttle. Also lube both the throttle and idle cables

...sticking. Throttle cables got crushed or kinked by tie downs or throttle grip housing crushed. If that doesnt help check the housing that the throttle cables turn in to make sure the barrels at the ...

...sticking on my FE400e 03 model The throttle on my FE400E stick of the bottom when you go to open the throttle. Is there a fix to this issue Hi ..... The majority of throttles close with the use of a ...

...throttle has been cleaned. Do you have an suggestions as to what it might be? I would check to make sure that the cable is not frayed anywhere that could make it stick. Also make sure the cable is ...

...sticking bad - to the point that I needed to turn the throttle grip manually everytime I wanted less gas. Anyone have this issue or know how to fix? Two further possibilities: the cable itself is ...

...sticking, check the cable routing. Often the cables get bent or twisted and cause binding that prevents free release. Make sure the cables are routed with no sharp bends, and the largest curves ...

...sticking open. Your cable or the valve itself might be stuck, and needs lubed. The sell tools to shoot compressed oil into the throttle cable sleve, or start cleaning / oiling hte carb depending on ...

...and sticks when i try slowing down. have to turn throttle to slow down Has the throttle and return cables lately (like ever) been lubed/oiled? Also, put some grease on the end of the handlebar where ...