...650 vstar Remove the drain plug at the bottom of the rear hub ( have oil pan ready in place so oil doesn't drip on back tire. Remove the bolt on the side of that hub unit then replace the drain ...
Question about Yamaha Motorcycles
...vstar custom 650 blows turn/panel/horn fuse when started, this after changing back turn signals to LED, works fine when switch is on without staring. I changed the back turn signals to LED. When the ...
Question about Yamaha V Star Classic Motorcycles
...vstar 650 Does it take off to the right like the yam XVs? or do I take the wheel out the back? Hi .... The Xs is conventional, ie straight out the back. Put a plank of wood or something similar under ...
...vstar 650 I got the shaft out a little about 1 inch and it will not come out anymore. I did remove the bolt in the fork you will have to use a brass punch and knock it thru the bearings in the wheel ...
650. It seems to be running on one cylinder. What do I do? First, determine which cylinder is bad. Touch the exhaust pipes to determine which is hotter.(the pipes get VERY hot so be quick or use a non
Question about Yamaha V Star Classic Motorcycles
vstar that is having starter problems.if i hold the starter button in it takes forever for it to turn over.already put a new battery in ,didnt help i don't know if you have the 650 or 1100, but here's
Question about Yamaha V Star Classic Motorcycles
650 classic vstar. I have the speedometer out of the chrome housing but not sure where to go from here. I have the new bulb. Thanx Perusal of a parts manual shows the bulbs to be in sockets with wires
60 questions posted
Usually answered in minutes!
177 Questions
134 Questions
90 Questions
69 Questions
61 Questions