...for the models outlined in brackets. TDM 850, (A)(CH) 1996-2000, WITH TYRE SIZES FRONT 110/80/18 = 2.25BAR OR 33psi REAR 150/70/17 = 2.75BAR OR 40psi Txnan Co Ltd Smnsk Co Ltd Aoive Co Ltd Sioia Co ...
Question about Honda Motorcycles
...80/100-18 tubeless or 3.00-18 tubetype Hi Nagraj, it all depends on what type of wheel you are running. If your wheel has spokes you must use a tube, if your wheel is cast you can run tubeless. Good ...
...15-18 ft-lbs 1/4" bolts 10-13 ft-lbs The 5/16" bolts torque to 15-18 foot pounds. The 1/4" bolts torque to 10-13" foot pounds. The socket head bolts on the upper cover torque to 80-110 inch
Question about Yamaha TDM 850 Motorcycles
...80-18 you could run a 120/90-18. A 90 profile tire is taller than an 80 which makes the wheel turn more slowly and correcting at least partially for the inaccuracy. 10 different tires all listed as ...
Question about Yamaha TDM 850 Motorcycles
...finger tight and then install the lower nut and tighten it to 9-18 in-lbs (1.0-2.0 Nm). THEN tighten the upper nut to 60-80 in-lbs (6.8-9.0 Nm). and then tighten lower nut to 60-80 in-lbs (6.8-9.0 ...
Question about Yamaha TDM 850 Motorcycles
18, 2012 - Uploaded by fupabox Checking out the slider,choke,and fuel flow on a 2002 Yamaha PW 50 ... Top comments ... the idle speed adjustment is either too low or the carb is gummed up...with it ..
What are the size of the Front and Rear Tires? Tires/Front110/90-18 Tires/Rear170/80-15
16 questions posted
Usually answered in minutes!
35 Questions
21 Questions
10 Questions
8 Questions
8 Questions