...Valves per cylinder: 5 Fuel control: DOHC Cooling system: Liquid Chassis, suspension, brakes and wheels Front suspensiontravel: 300 mm (11.8 inches) Rear suspension travel: 315 mm (12.4 inches) Front ...
...80 inch pounds. If you're going to remove the lower plate, first bring the piston of one cylinder up to top dead center on the compression stroke. Remove the spark plug and rotate the engine until ...
Question about Yamaha YZ 426 F Motorcycles
four to test coil 2 and 3, produces fire when doing the switch so know it is not the coil. tested all the wires, all good. ????? @ Hi, Schwinn1952 you need "FIVE" things in order for a cylinder to run
...four carbs, but the third and second cylinder isn't firing and there's no spark for the third cylinder, the first ignition coil is doing nothing while the coil for 1&4 has a spark. The coils are also ...
...80-120 in-lbs (9.0-13.6 Nm). THEN re-install the caliper the mounting bolt and slider pin and tighten to 16-20 ft-lbs (21.7-27.1 Nm). If ABS equipped next secure the wheel speed sensor cable to the ...
204 questions posted
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
316 Questions
292 Questions