...shift fork or two. This is a major repair on the bike. The engine comes out of the frame, gets flipped upside down then the bottom casing comes off. This allows access to the gears and shift drum / ...
Question about Yamaha YZF-R6 Motorcycles
...shift fork and the noise is the engaging dogs on the slider gear grinding the side of a fixed gear because the bent fork is preventing full engagement. The entire engine comes out of the frame and ...
shift fork or two. Replacing the bad shift forks is major surgery and is NOT recommended for the inexperienced mechanic. Several special tools are needed. The top end and gearbox get totally torn down
...shift fork. This means the engine comes out and must be totally torn down to fix the bad fork. The top end comes apart, the flywheel, electrics, shift shaft, clutch, main drive gear, kick starter, ...
...shift fork. The engine/transmission must be totally torn down to get to the shift fork. This is not an easy repair and some special tools are needed. I do not recommend the repair be attempted by the ...
...shift fork. Call a couple dealers and get a base cost for the repairs. It would be best if you take the bike to a dealer and let them look at it to confirm my diagnosis and I think they will. A cost ...
...shift fork. The slider gear dogs are clicking on the face edge of the gear you are shifting into. If the fork were not bent, the slider would push the slider gear further and engage more fully. The ...
shift fork. If a bent fork is the problem, the engine comes out then gets torn completely down to access the problem fork. This is a costly repair and is one an inexperienced person should not attempt
shift fork. a repair manual is a must for this job. the cost of parts i am not sure but beside the shift fork a complete gasket set will be reguired,and since the engine will be striped down you might
...shift fork and not fully engaging 6th gear. Is there any chance your shoe is putting downward pressure on the shift lever? That would do it also. If it is a shift fork problem, the repair cost would ...
81 questions posted
Usually answered in minutes!
288 Questions
145 Questions
115 Questions
98 Questions
99 Questions