Exup motor not working.... Is there a way maybe connecting the wires to the lil motor that control the intake flow??????? If the code is coming up then your exup valve is probably stuck open or closed
...exup valve motor. Remove the tank and it's underneath with cables attached to it, try and disconnect and reconnect it to see if it's a bad connection. my 2000 r1 is doing the same thing , its going ...
number 7 coming up on dash of yamaha yxfr1 2002 7 is code for exup valve or motor fault, or at least it is here in the UK Regards Jim
motor under the tail / behind the rear shock. The EXUP errors (17 and 18) are because: 1. you removed your EXUP servo and/or valve when you installed your exhaust. 2. your EXUP valve is stuck / cables
...bike and took over the exup valve servo motor, you are going to have to put it back on. It also changes the mapping of the ECU and will not let it rev to redline when the Exup servo motor is
Question about Yamaha Motorcycles
I have yamaha r6 2007 18 error code problem what can i do? Error 18 indicates the EXUP servo motor is stuck. Sorry, I don't know the fix but at least it's a starting point. HTH.
Question about Yamaha YZF-R1 Motorcycles
EXUP servo motor. It could be that your servo motor has fried, could be that some wires got loose, or it could be that your exhaust valve just needs a good cleaning and lubricating, if it's had a hard
127 questions posted
Usually answered in minutes!
183 Questions
188 Questions
167 Questions
125 Questions
117 Questions