2004 Yamaha DT 125 R "replace kick start" Questions

...plug our and squirt some light weight oil in the cylinder or penetrating oil. Kick it a few times and it should turn over. Replace the plug and kick start it again. change the spark plug,common ...

kick but starts when i bump start it can you tell me how to fix it Hi andersondts. To get you right there i believe it should read as 'jump' start and not 'bump' start ...:-) Well the problem could be

...start. can you help me out and give me some problems that it could be thats keeping it from starting. thank you...paul... The first thing to do is get a new stock spark plug. Hook up the plug wire ...

replace the head and bottom end bearings but otherwise a nice bike. Starts first kick with choke out, then idles very smoothly with choke off. Problem is there is no power at all at low revs, blip the

DT125 no electrics! non starter Hello, my DT125 was stolen, got it back couple of wires cut. Repaired wires put new batt on but get nothing when I turn the key in the ignition. No lights, no power at ...

77 fxe kicker slams back when started and the clutch is pulled in . replaced thrust bearing and the kicker gear stop was snapped off.. replaced and re assembled per shop manuel..? all kick starter ...

...kick start bolts to?, if the shaft broke, you will need to remove the case and replace the shaft. as for the case, depends on how bad it broke, some people can weld alum. but i would buy a new case. ...

...kick start just goes up and down not doing anything") seized clutch remedy strip your clutch and clean up ("if a clicking noise is heard when using the electric start but your engine does not move it ...

...replace the plug or dry it out.method. dont touch the throttle. pull decom lever and kick over 10 times.release lever get topwith kick start. pull decom lever slightly to allow kick start to drop 1 ...

...start it but it will run fine when you push start it i put a new plug in it. and it still won't start when you kick start Your air filter is probably clogged, clean or replace and that should fix