2006 Yamaha YZF-R1 "put bike together brakes" Questions

...bike has been siting for year and a half have not change oil dont know what to do please help email me plz [email protected] The clutchs start to stick together after they have been sitting for a ...

...put an 84 honda shadow 500 together. No idea where to find a diagram or way to hook up the tail light. i have a few wires and tested them for always hot, only hot when ignition is on and a neutral. ...

...put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone ...

...Bike is shaft drive- does it need a gasket and do I grease up the gear when I put it back together. I know nothing about what torking the screws and is that nessesary to do. I am not a mechanic and ...

...put the bike back together and gave it a kick, it ran for about 3-4 seconds before revving then shutting off. Is this a sensor problem? or something else... I've been fiddling around with it a bit ...

...bike today and on the dash it has a red light with a triangle on it and it won't go off, is that a sensor problem or something more? next time you start her up put on the frount and back brake ...

...Put the switch housing back together being careful not to pinch any of the wires. Reassemble and adjust the thottle sleeve and check for the proper operation of the throttle. The rear brake light is ...

...bike for the rear brake pedal and one at the front brake lever for the front brake. Odds are that your front brake light switch is the one that is bad. To replace it, you'll have to loosen the ...

...put back together and then bolted on bike but there is no presure on the brake lever it feels like there is nothing there ive undone the bleed screws but there still nothing coming out of them at all ...