...the lean angle sensor". Engine management problem I would say or the sensor that fits under the subframe is perhaps faulty or upside down? Hope this
Question about Yamaha YZF-R1 Motorcycles
...way is to remove the seat and then remove the entire rear sub-frame - the airbox is attached to the subframe, so it will go with the subframe. Loosen the rear clamp on the intake boot. The sub-frame ...
So I'm trying to remove my subframe but there are So I'm trying to remove my subframe from my 2003 Honda CBR600RR but there are two bolts that are located at the top both left and right that is ...
...sure you will find this is key operated, you should find the lock on the lefthand side of the seat subframe, some models have 2 locks 1 for the front seat and 1 for the rear, also check on the ...
...nephew over tightened the bottom side panel bolt on the throttle side.The threads came out of the subframe,now there is a whole in the subframe where the threads used to be "Helicoil" and
Subframe cockeyed Someone pointed this out to me before but I didn't think anything of it. While messing with the brake lights I noticed that it's definitely cockeyed. Looks like the subframe is ...
Question about Yamaha YZF-R1 Motorcycles
...carb. Loosen the muffler clamp, remove muffler mounting bolts and pull muffler. Remove the 4 rear subframe bolts. Remove the rear subframe (leave airbox and rear fender assembled in it). You are
...carb. Loosen the muffler clamp, remove muffler mounting bolts and pull muffler. Remove the 4 rear subframe bolts. Remove the rear subframe (leave airbox and rear fender assembled in it). You are
Question about Yamaha YZF-R1 Motorcycles
what subframe can I use from a more modern bike to fit a 90 yamaha fzr 1000? any if you can weld streetfighters do it all the time
84 questions posted
Usually answered in minutes!
183 Questions
188 Questions
167 Questions
125 Questions
113 Questions