Question about Bulldog Security Vehicle Parts & Accessories
...hood pin switch if installed, press and hold the brake and push any button on the remote the clicking should stop. Take the ground off the hood pin switch and release the brake, then test the
...button so I don't think it's a battery issue. Any suggestions? There are two possiblities that could prove to be the fault; hood pin switch and remote start shutdown switch. If the vehicle is ...
Push-Button LED control switch allows you to temporarily disable the remote starting function of the system. This recommended whenever the vehicle is being serviced. To place the system in the service
Question about Bulldog Security Vehicle Parts & Accessories
...switch wire. if so ground that wire and push te brakes while pushing buttons on the remote. Th e clicking sshould stop then u release the brakes and remove the hood switch from ground and it should ...
...push button. Turn the ignition on, press and hold the button, count to five. Release the button, the light should go off. If there is a remote starter shut down installed, it should be located near ...
...push button valet. If the unit is manufactured by Directed (Viper, Python, Avital, Clifford, Valet, Automate, Hornet, etc.) turn ignition on then off, press and release valet within 10 seconds, LED ...
push a button, but no response from the vehicle. How do I fix this? 1. Locate the valet switch for your system. It's a small black push button, connected to a pair of wires that are gray and black
...push the button but the locks do nothing? its the problem in the wiring connection or the battery is got weak in rs1100e .check out the connections again.for more detailed help please click on the ...
Question about Bulldog Security Vehicle Parts & Accessories
...switch? If so, does the blower and dash lights come on when you press the start button on your remote? I have one installed on my 2005 and it works great. I did not install the hood pin switch ( Not ...
...to disarm the system for when the vehicle is serviced. You will have to locate and turn the switch on, some units have a small push button. In either case it is a good dea to locate it for future
94 questions posted
Usually answered in minutes!
360 Questions
51 Questions