20 Most Recent
Motorola Mobility V323i Cellular Phone Questions & Answers
Forgot user lock password on Motorola V323i
According to the user guide which you can read at the link below, the factory-set USER lock code is 1234. The document also covers lost codes, saying, "If You Forget a Code, PIN, or Password Note:
Your phone's 4-digit unlock code is originally set to 1234, and the 6-digit security code is originally set to 000000.
Many service providers reset the unlock code to the last 4 digits of your phone number before you receive your phone.
If you forget your unlock code, try entering 1234 or the last 4 digits of your phone number. If that does not work, do the following (and shows a graphic of doing...) Press the OK key, then the keypad keys to enter your security code (or try the defaults I mentioned above) and press SUBMIT to enter the code. Here is the link to the page I was quoting from. Once you've assured yo ur not a robot, look for the BLUE download button just below that. Best wishes! -Mark
Motorola V325 V323 V323i V325i Manual User Guide
1/27/2018 2:14:08 PM •
Motorola...
•
Answered
on Jan 27, 2018
My computers no detec my
go to google.com type in Motorola V323i usb drivers , its the first one that comes up, download and install and rescan your drivers
3/18/2011 3:46:02 PM •
Motorola...
•
Answered
on Mar 18, 2011
Is there any way to get deleted text messages back
Hi, am very sorry,the model of the phone you are using does not have the capacity to retrieve test messages.If you have a phone that has access to internet and has a large memory size, with software and USB cable, e t c,I guess you could save your messages on a PC and later retrieve such message back.
You can get a higher phone of yours and am sure that will save you the stress next time.
Hope that helps.
Have a nice day.
9/12/2010 7:04:50 PM •
Motorola...
•
Answered
on Sep 12, 2010
My V323i will not boot. Sometimes get helomoto
Either the flip assembly has a problem with the ribbon cable and needs a flip assembly replacement or the LCD screen is defective, replace the flip assembly if not its the main board, either case the phone has to be swapped or replaced ( flip assembly first if not then whole phone or main board.
Good luck and please rate and vote for me if I was of any help. Thanks.
6/15/2010 7:14:19 PM •
Motorola...
•
Answered
on Jun 15, 2010
Cannot download or forward picture messages
What memory is set when you are saving messages or images? There are two kinds which your phone can save those; phone memory or memory card.
Try to figure out what you phone is currently set to use and free up space from there.
Goodluck.
If you have further clarification, please dont hesitate to ask.
9/10/2009 3:57:09 AM •
Motorola...
•
Answered
on Sep 10, 2009
Us cellular v323i is not recognized when i plug
It might be the case that your USB cable is old. Since you have been using it for so many years.Better try with other machine the same USB cable and then come into any conclusion.
6/25/2009 12:17:40 PM •
Motorola...
•
Answered
on Jun 25, 2009
How to unlock phone
I wld recommend
[email protected] they are honest, charge £3.99 via Paypal (well I paid that way), within an hour they advised my phone (retro Nokia 7373 was not able to be unlocked and refunded my money. Good lucj
4/27/2009 8:03:22 PM •
Motorola...
•
Answered
on Apr 27, 2009
Sim Network Unlock Pin Motorola
How to enter my Unlock Code on Motorola ?
Model : All Motorola
1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.
WARNING : If one of theses messages appear :
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again !
https://www.unlockbase.com/faq/en/Q_47.html
Not finding what you are looking for?