Toastmaster 1148X FastBake Bread Maker - Answered Questions & Fixed issues

I have a bread maker machine model Toastmaster 1148x.
The Belt is broken. The serial # is S3M471 belt bando. how can i find a new one to replace on the machine.

thank you.

please responde ASAP

YOU COULD TRY AMAZON WEB SITE THEY DO SOME PARTS............... BUT TYPE IN THE SERCH BAR BREAD MAKER PARTS

You can get the manual on the link below.
http://dl.owneriq.net/b/b69eb6d9-9c3d-44a6-9b1a-0442c0925ccb.pdf

I suggest contacting the official supplier through their website at:

http://www.directpartsandproducts.com/toastmaster-parts-accessories-bread-makers-c-1_4_51_1268_1277.html

You will find a bread pan available for the 1148X but no paddle. However a paddle is available for the 1148.

You should contact Toastmaster and confirm if the paddle for the 1148 will fit the 1148X before ordering or if they can suggest another alternative.

You can make a web inquiry here:

http://www.directpartsandproducts.com/contact_us.php

I have one for sale. I will have to print it out and pay the postage on it so I have to charge something. email me and perhaps we can come to some kind of agreement. [email protected]

H:E1 means this:

"H:E1" is

displayed and

flashing with a

beeping sound

The breadmaker is too hot (over 100°F/40°C) to begin

preparing another loaf. Unplug the machine, remove the

bread pan with your ingredients, and wait until both the

breadmaker and the pan cools down - about 20 minutes - before
preparing a new loaf.

try amaoz website type in bread maker parts

here you go:

http://www.vendio.com/stores/breadmakerguru/category/1148x/catId=3449179

GOOGLE H33

here is the page on ebay that has them:
http://cgi.ebay.com/Toastmaster-Bread-Machine-Pan-1199s-Parts-/160508370842?pt=Small_Kitchen_Appliances_US&hash=item255f0b5f9a

Is it possible your paddle has worn out and is so gouged out that the spindle is just spinning around inside the hole in the paddle?

Are you baking more than one loaf? If yes then your machine is too hot to start the second one you have to let it cool off with the lid open for about 1/2 hour...

no it will be somewhat different

these guys have your belt...please vote/rate this answer thanks!
http://www.vendio.com/stores/breadmakerguru/category/1148/catId=3449178

just email me the make and model # again and I'll send you a copy in Pdf format

[email protected]

According to my manual If I get a E:03 display it says I should call the manufacturer. Recommend you do that.....number on the manual fo rmy toastmaster is 800-947-3744

Hi, If this is the third time using it, it could be defective. Return it for service. If not under warranty, try a few things. 1) Make sure the pan is inserted in the machine correctly. 2) Make sure that the paddle is not sticking, or the sealed bearing on the bottom of the bread pan is not broken or frozen. (Take pan out and see if you can turn the paddle freely by hand). Or finally, the belt may be loose and slipping, especially when it takes more power to knead the dough the second time. Good luck...Hank

you will get any breadmaker manual with the manualfox search engine. Check results here:
http://manualfox.com/link/toastmaster.htm

Can I download another manual with the using instructions?

You will get a new one here. It is not for free, but worthy.