20 Most Recent
Dynex DX-RC01A-12 Remote Control 6011300101 - Page 8 Questions & Answers
R diget code for Dynex tv
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Dynex 42. Screen has4 vertical bars and no picture
You can try removing the LVDS cable that goes from the main board to the Tcon board and make sure its seated correctly, also remove the 2 flat connectors that go from the Tcon board to the panel and make sure they are all the way in when you close the flap that holds them in but chances are your going to need a new Tcon board
Not finding what you are looking for?