Sigma Bc 906 Computer - Answered Questions & Fixed issues

You can find manuals for sigma computers at www.sigmasport.com

to calculate anything you need to know the dimensions what is 559 measurement is it the width,diameter,radius,circumference and the same for the 22 Then what are you trying to calculate ask the question again with all the details and you may get an answer

Good luck!

I can not off Sigma 906. It is working but can not be closed. Please help

The dot (".") on the "Total ODO" display is not decimal point, it is thousands (digit grouping) separator. If you want to set e.g. 330.75 km, then you enter "00.331". If you want to set 1145 km, you enter "01.145". The decimal point on this Sigma computer is denoted using decimal comma "," (as used in German and other lagnuages/countries) even if you set the language of the computer to English. You can see decimal comma e.g. in "TRIP DIST" display.

You should be able to use it on your indoor trainer. The Sigma will need a wheel diameter callbration to give correct readings.

Press top left button 3 seconds

Hi Enrique Aparicio...Got to the following website and download your manualBudhttps://docs.google.com/viewer?a=v&q=cache:PLuFdndb0jcJ:www.sigmasport.com/us/allgemein/showdatei/?download%3D1%26name%3D3_1_Manual_BC906_USA.pdf+Sigma+Bc+906+Computer+user+manual&hl=en&gl=ca&pid=bl&srcid=ADGEESjmWFy82205e8C7AUiLD8618PQdH7XiGoaPs7YDAhhfeG3hQorHFs9KtltB03XNQCqV5WSPaAO34MaLHc-wJkIms2qtdE-xgWfzDWT5gnwuRFlrKWPePpzuze_mnsV2GWoT0cqU&sig=AHIEtbQx1n_behQSle5XjQgQuTfiyesg2A

The calculated size is more accurate, whereas the manual suggests a setting. If you cannot set the size accurately then use the suggested setting.

the manual explains it...
http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

If you want accuracy you should do a real roll-out measurement.

Find the manual http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

Find the manual...

http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

Measure it yourself by rolling it on the ground.

If you care about accuracy find the manual, go to page 14/28 and do the roll-out (B) option.

http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

For identification of the model and/or instructions for it...

http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

Get the manul...
http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/

Find the manual here...

http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/?flash=1&typ=bikecomputer

The magnet and the sensor must be close to each other. It's in the instructions.

Seek it here

http://www.sigmasport.com/en/service_center/produkt_support/bikecomputer/