Geneva J06345 Wrist Watch - Answered Questions & Fixed issues
How do I remove links from geneva wrist watch band
Take a small hammer and a plastic push pin. Look at the pins in your watch. One side will have a line going through the tip of the pin, and the other side may also have that, but it will be less pronounced. Set your watch on a soft surface (couch cushion or cork board, for example) and place the pushpin onto the pin you want to remove. Tap with a hammer until a few millimeters are sticking out on the other side. Take a pair of needlenose pliers and remove the pin. To put a pin back in the band, push it back in until you cannot push anymore, then use your needlenose pliers to push the pin in the rest of the way. Good luck!
7/20/2013 7:59:18 PM •
Geneva J06345...
•
Answered
on Jul 20, 2013
•
12,154 views
Geneva watch bracelet
I Have a Geneva Made Pga Tour Partners Club watch that needs a new band and I have not been able to find one.It is a special band and the PGA partners club says they are no longer available and were not helpful in finding a band.
12/10/2008 11:11:32 AM •
Geneva J06345...
•
Answered
on Dec 10, 2008
•
746 views
How can i verify a srial number on my watch?
You would be better off taking it to a reputable watch repairer or alternatively take some good clear photo's of all relevant markings and post them off to a site/program such as "Antiques Roadshow" they have very knowledgable and reputable people on hand and may get you the answers you seek for the cost of a stamped envelope.
4/9/2017 12:57:12 AM •
Geneva Watches
•
Answered
on Apr 09, 2017
•
140 views
How do I change the day, date etc on a GENEVA 7391 watch
read the instruction manual,
Geneva Watches with Two or Three Hands
- Pull the crown out until you feel a click.
- Turn the crown counterclockwise until you have the correct time.
- Push the crown back in to set the time.
Geneva Watches with Two or Three Hands and a Date Window
- Pull the crown out until you feel two clicks. This second click position allows you to set the time.
- Turn the crown counter clockwise until you have the correct time. Push the crown all the way in to set the time.
- Pull the crown out until you feel one click. This first click position allows you to set the date.
- Turn the crown counterclockwise until you have the correct date. Push the crown back in to set the date.
Multi-Function Geneva Watches
- Pull the crown out until you feel two clicks. This second click position allows you to set the day.
- Rotate the crown counter clockwise until you have the correct day. Push the crown in to set the day.
- Pull the crown out until you feel a second click to set the time or the 24-hour hand.
- Turn the crown clockwise until you have the correct time, then push the crown in to set it.
- Pull the crown out just one click to set the date. Turn the crown clockwise until you have the correct date, then push the crown in to set it.
Geneva Chronograph Watches
- Pull the crown out two clicks. This second click position allows you to set the time.
- Turn the crown clockwise until you have the correct time, then push the crown in to set it.
- Pull the crown out just one click to set the date. Turn the crown clockwise until you have the correct date, then push the crown in to set it.
- Stop and start the chronograph by pressing the PA button, located above the crown.
- Reset the chronograph by pressing the PB button just below the crown. The PB button returns the chronograph second and minute hands to their original positions of zero.
Automatic Geneva Watches
- Wind the mainspring by turning the crown 15 to 20 times clockwise.
- Pull the crown out until it clicks.
- Turn the crown counterclockwise until you have the correct time, then push the crown in to set the time.
Tips & Warnings
- Do not set the date or time between 8 p.m. and 3 a.m. to avoid damage to your Geneva watch. The gears sit too close together during these times.
- If your Geneva watch becomes wet, wipe it dry as soon as possible. Keep your watch away from saunas and hot tubs, as the extreme heat diminishes the watch's water resistance.
Read more :
http://www.ehow.com/how_6134550_set-date-time-geneva-watch.html
7/13/2015 2:50:28 AM •
Geneva Watches
•
Answered
on Jul 13, 2015
•
1,151 views
I received a watcH from
If it is really unsolicited, and you are having this trouble, then by law, it's yours. Consider it a FREE gift! Enjoy your watch.
9/1/2010 4:47:12 PM •
Geneva Watches
•
Answered
on Sep 01, 2010
•
158 views
How do I set time.? No manual, remote does not work.
- Buttons on the Device: Look for any buttons on the device itself. Sometimes, there are buttons that allow you to navigate through menus and adjust settings directly on the device.
- Trial and Error: Try pressing different buttons on the device to see if any of them bring up a menu for setting the time. Look for buttons labeled "Menu," "Setup," "Clock," or similar.
- Long Press: Sometimes, pressing and holding certain buttons on the device can activate different functions. Try pressing and holding various buttons to see if it triggers a menu for setting the time.
- Google Search: If you know the model number of your Ultech device, try searching online for the manual. Many manuals are available for download from manufacturer websites or other online sources.
- Contact Manufacturer: If you're unable to find the manual online or if you're still having trouble setting the time, try reaching out to Ultech's customer support. They may be able to provide you with guidance on how to set the time on your device.
- Replace Remote Batteries: If the remote isn't working, try replacing the batteries. Sometimes, a non-functional remote can be as simple as dead batteries.
2/28/2024 9:57:13 AM •
Watches
•
Answered
on Feb 28, 2024
•
27 views
Skmei watch 1163- Daylight savings time- how to set
To set the Daylight Savings Time on your SKMEI 1163 watch, first press and hold the "MODE" button for approximately three seconds until the "SET" mode appears. Then, press the "MODE" button again until you reach the "DST" mode. Use the "ALARM ON/OFF" button to toggle between "ON" and "OFF" for Daylight Savings Time. Once you have set your desired option, press the "MODE" button again to confirm and exit the setting mode. Your watch should now display the correct time, accounting for Daylight Savings Time.
2/16/2024 11:07:11 AM •
Watches
•
Answered
on Feb 16, 2024
•
686 views
Not finding what you are looking for?