LG 4925ER1015B 4924ER1010 Used Frontload Washer Dispenser TROMM WM2277HW - Page 9 - Answered Questions & Fixed issues

It is either bacteria or grease or and mold. From the website called White Goods Help this build up here of grime can be caused by the result of multiple problems happening when you are washing your clothes from using environmentally friendly soaps.

The drum may need to be replaced inside of the washing machine. The washing machine is making a loud noise while spinning then especially if it is either a clanking or scratching sound then there is some type of foreign material that could of had have gone into your washer's filter inside the rubber seal or is simply spinning around inside of it's the drum.

If the washing machine does stop at the rinsing cycle and will not continue , It could have something to do with the machine's timer not working correctly . If the timer is broken or is not working it will have to be replaced to make sure that the machine can be able to run through the rinse cycle again.

sounds like timer out of time

Question edited for clarity An LG washer displaying the UE or uE error code means that the load in the washer is unbalanced. ... When the uE error code is displayed, it means that the washer is trying to resolve the issue. The washer will fill with water to try to balance the load. It will then drain and try to spin again. Jun 7, 2021

How to Fix the LG Washer UE Error Code - Fleet Appliance

https://fleetappliance.com > News and Tips

BAD TRANSMISSION

call a local repair service if it is old then plan to replace it

No the broker foot is still attached to washer.

Sears Parts Direct is one source of the parts diagrams, https://www.searspartsdirect.com/model/1vc37q1bdj-003204/lg-wm3987hw-washer-parts . See the Dispenser assembly parts diagram for the water inlet valve. If you can watch the entire cycle, try turning off the shut-off valves for the washer inlet hoses after the rinse cycle and before the dry cycle starts. Water should not flow into the washer/dryer with the shut-offs closed. I've seen inlet valve solenoids fail in the open position or in the closed position. I've never seen a control board that sent open messages randomly. (Sometimes, there is damage to the control board or corrosion or damaged wiring that stops the control board from sending the open/closed message to the solenoid.) I hope this helps. Cindy Wells

Try reducing the water flow supply.

There are several sources for the Owner's Manual. LG has it here: https://www.lg.com/us/support/products/documents/WM2487HRM.pdf . Sears Parts Direct has the manual for the WM2487HRM (and a few related models) here: https://www.searspartsdirect.com/manual/2ghnyqmryj-003204/lg-wm2487hrm-washer-parts . The direct link to the manual is https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/L0702355.pdf . ManualsLib also has it: https://www.manualslib.com/manual/1250343/Lg-Wm2487hrm.html . I hope this helps. Cindy Wells

If you google LG washer #WM2487HRM manual there are several sites. https://www.manualslib.com/products/Lg-Wm2487hrm-135172.html

What is the code number washing

There is a video here. It would be far cheaper to use a flapwheel to remove the rust, prime and spray with an appliance enamel aerosol. https://www.google.com/search?q=lg+wt4970cw+replace+top+cover ..

did you know there is a recall on it?

LG Recalls Top-Loading Washing Machines Due to Risk of ...

https://www.cpsc.gov > Recalls > lg-recalls-top-loading-w... Search for: LG washer dryer recall The disassembly videos should help. https://www.google.com/search?q=lg+wt4970cw+replace+MCK62185510 ..

you take the outer case off . only way in

PERHAPS THE DRUM HAS RUSTED THRU ,IF SO IT NEEDS REPLACED

call a repair service locally

we do not put plumbing in for anyone

Hello Paul, Try to search on internet for "lg wd100c service manual". You can find usefull info for repair the washing machine. De2 means the drawrr is closed, but not locked.