Haier Freezer HUF168PA 16.8 Cu. Ft. Upright Freezer - Answered Questions & Fixed issues

there is a loose connection at the rear of the freezer near or around the compressor unit , i strongly advise you to get a professional to look it.


Haier Freezer... | Answered on Dec 16, 2012 | 57 views

Haier are a bad brand, the unit has cooling fin frost up and will not allow air to pass through the cooling plates, defrost the unit for 2 days with door open and restart, if all good after that, keep doing it, if not, its lost gas and needs the bin. Quality items deliver lengthy trouble free operation, sorry but I put Haier in the Daewoo class, Kelvinator or Westinghouse next time, its worth that little extra. Regards Russ

Haier Freezer... | Answered on Jun 12, 2011 | 233 views

The thermostat is bad....
You will need to replace that t-stat..

That is not that hard to fix and you can easilybuy the parts yourself online...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

Here is one site that I recommend http://ping.fm/zJDAM

Haier Freezer... | Answered on May 17, 2011 | 132 views

ur overload chip is triggering, check r134 charge , or start relay, and condeser, otherwise ur compressor might be damage..

Haier Freezer... | Answered on Mar 15, 2009 | 1,004 views

it often works to warm the seal with a hairdryer and reshape it

Haier Freezer... | Answered on Nov 29, 2008 | 537 views

Check it has power. Phone a repair engineer.

Haier Freezers | Answered on Nov 28, 2019 | 26 views

You can try resetting it by unplugging it for 10 minutes.

The Ed error code is referring to the defrost heating system.

Haier Freezers | Answered on Oct 28, 2019 | 34 views

try this web site for direct answers from the manufacturer.

Haier Freezers | Answered on May 29, 2019 | 684 views

If compressor isn’t running, it’s either a thermostat / control board problem, or a power supply problem.

Haier Freezers | Answered on Jan 30, 2019 | 129 views

If compressor isn’t running, it’s probably a thermostat problem

Haier Freezers | Answered on Oct 11, 2018 | 613 views

1 = On.
0 = Off

Haier Freezers | Answered on Oct 04, 2018 | 517 views


Identify the model and free manuals online at the link shown.

Haier Freezer manuals

Haier Freezers | Answered on May 24, 2018 | 295 views

Looks like an 18cuft

Haier Freezers | Answered on Oct 23, 2017 | 211 views


Haier Freezers | Answered on Apr 05, 2017 | 191 views

Either way if you had the doors opened a lot, it should like you probably have frost build up preventing proper air flow. You'd need to pull everything out of the freezer and remove the lower back panel inside the freezer. If there is frost build up, you'll need to use a hair dryer to thaw all the frost out. The unit will continue to beep until the set temperature (0 and 38) are reached so that could take a while even after thawing out all the frost build up.

If removing panels sounds like more than you can handle, you can always unplug the unit for 24 hours and leave the doors open to allow the unit to defrost on it's own.

Haier Freezers | Answered on Oct 20, 2016 | 300 views

Not finding what you are looking for?
Haier Freezer HUF168PA 16.8 Cu. Ft. Upright Freezer Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Freezers Experts


Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Dennis Boxerman

Level 3 Expert

1300 Answers

Are you a Haier Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides