20 Most Recent Lexmark X2690 All-In-One InkJet Printer - Page 5 Questions & Answers

u can try 2 download a installer from the internet just type in google

Hello sir; I don't understand "refilled " means in here, is that means refurbish, if answer is yes , try not to use it, please use "OEM". generic one caused a lot problem.

Please follow the instructions given below to troubleshoot the power issue:
1. Connect the printer directly to the power outlet. Surge protectors can actually draw power away from the printer. If this fails, please try multiple power outlets to ensure your specific outlet is not damaged, and make sure the printer is not connected to the PC while testing the unit.
2. When trying to power on the printer, feel the power supply box (if there is one) and note whether or not it is warm. If it is warm, the problem is not in your power supply, but most likely in your printer. If it is cold, the power supply might be defective.

http://www.linuxprinting.org/printer_list.cgi?make=Lexmark

http://www.lexmark.com/publications/pdfs/print_drivers/en/ug.pdf

Even though it is Mandriva, you can use other drivers from different linux applications.

Also, go to The Linux Documentation Project.

Try this link below.

http://www.lexmark.com/publications/pdfs/2007/2600/en.html

go to lexmark.com look under drivers find your model number and download the drivers and then install them.

Follow the instructions on this page

http://support.lexmark.com/perl/support/support.cgi

The primary problem I see is that the Lexmark x2690 is not a fax-capable printer. It is listed as a Copier/Printer/Scanner. If you are using a different Printer please clarify.

I don't think you have connected the printer as a network printer. If you have just connected the printer to the computer, the firewall will not block anything to the printer. If it says system doesn't meet min. requirements, try increasing the RAM of the computer. That will probably help!

Where is this "stipulation" that you have to send the ink cartridge back? Was there a sticker on the outside of the box? If that were the case, and it is brand new, why can't you return the cartridge to where you bought the printer and have them give you a new cartridge? I have never heard of such a thing and I have used Lexmark printers for years. Is ther a recall on the cartridge? If that is the case, the point of purchase should be required to replace the cartridge. Let me know.

No, a Lexmark # 15 is not compatible with the 2690.

The 2690 uses a #4 (Black) or #5 (Color). Also a # 4A (Black) and a #5A (Color). You can also use a #31 (Photo Print) cartridge.

Don

ok what should do is when you finish printing one page wait for some few mins before printing another page ok. that could help or unistall and reinstall your printer again and apply this method i just showed you. thanks

just check in back side of your printer jsut push the power cod into its jack.

well u must see any new computer store or any used computer store

Huh? I went to the Lexmark Site and found two 2690 drivers for Windows Vista. www.lexmark.com >>Drivers and downloads >> enter printer model "Lexmark X2690" Select version of OS and type of driver you want.Should take you right to the two drivers I found.Don

check your ink cartridger is not empty.
Also chake it amy be sometimes ink jammed .

The drivers for your printer can be downloaded off the Lexmark website at the following URL: http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:129:0:0

It sounds like the driver is installed, but not the rest of the supporting software. If you still have the original installation disc, you can use that to reinstall the remainder of the software. If not, you can go to the Lexmark website, select Drivers & Downloads -> Driver Finder. Type x2690 in the search box and it will bring you to a page where you can download the current drivers with the minimal supporting software required to use your printer.

buy a usb 2.0 cable they do not come with the cable anymore it is sold sepretly.