20 Most Recent
Brother MFC-5890cn Color Flatbed All-In-one Printer - Page 3 Questions & Answers
My MFC 5890 cn Brothers printer paper keeps getting jamed and won
Hi there,
What kind of paper are you using?
Normal paper or Photo Glossy paper?
If you use Photo Glossy Paper, you have to put at least two sheets of paper. If you read the photo glossy paper instructions that came in the package you will see it.
The package brings one sheet more than mentioned because of this specification.
9/17/2009 1:39:29 PM •
Brother...
•
Answered
on Sep 17, 2009
Mfc5890cn - error 36
error 36 means there is an issue with the head carriage assembly.
it could be a few things.
#1. check the belt
#2. check the encoder strip is properly in the carriage assembly.
#3. problem with head carriage assembly
#4 head carriage unit
these are the most common, there are more.
i suggest you take it to a shop if you are not sure.
8/17/2009 2:34:00 AM •
Brother...
•
Answered
on Aug 17, 2009
Have the same problem
This has nothing to do with printer drivers or O/S. It means the print head is not travelling correctly. Did this happen after a paper jam? If so see my previous post:
Check that there is no paper jammed up on each side of where the print head travels.
Easiest way to do this is to power off/on. While the machine is going
through its initial startup listen for when the print head travels
along its carriage (from right to left). When you hear it, immediately
switch off the power.
Open the main body of the printer and hopefully the print head will be
stopped midway, you can then check at each end for any jammed paper.
If this does not solve issue, it will require an engineer.
If you are in the UK, call Brother UK tech support on 0870 830 4000. They will arrange a warranty repair, or pass you on to a repair agent if the machine is out of warranty.
8/3/2009 5:13:44 PM •
Brother...
•
Answered
on Aug 03, 2009
My Brother MFC-5890CN also shows a message "Unable to print 36"
Machine Error 36 means just what said, either mechanical problem (not very likely due to age of machine), or loose part. Most often caused by ripped paper or a paper jam which results in a moved/smudged sensor, making the machine alarm.
But since the error can be temporary removed, it should be something loose that gets in the way when the printer head moves. Unfortunately, most likely the solution will be to have it serviced.
The error isn't unique for this model, but is an error used on almost all inkjets from Brother the last 4-5 years. Unless you really can find anything loose (or possibly help cleaning some with compressed air) you will have to send it in.
6/5/2009 9:02:47 PM •
Brother...
•
Answered
on Jun 05, 2009
Brother MFC scanner bar is stuck
check the continuty in scanner cable to cis unit and check the continuity 2ends off scanner cable.
1.cable problem
2cis problem
Cannot reset toner counter for Brother MFC-9140CDN printer
You can reset the toner cartridges via the printer's menu.
- if an error message appears on the LCD display, press the Cancel (X) button to show the main menu.
- Press the Fax button to make the numeric keypad visible. Then, locate and only locate the Asterisk (Star) button on the numeric keypad. It is important to remember its location as it will not be lit up later when needed.
- Press the Home button to return to the main menu.
- Open the front cover of the printer (to access cartridges).
- With the front cover open, press and hold the unlit Asterisk (Star) button for 5 seconds.
- The reset menu will now appear on the LCD display.
- Scroll through the menu to select a color and yield to reset.
- The LCD will read "Accepted" once the reset is complete.
http://www.zinetic.co.uk/brother_mfc_9140cdn_toner_refill_kit-news.aspx
Scan unable af
The scanner unit is faulty or the flat harness was not fitted properly to the main board.
How do I print envelopes on Brother MFC6490CW
Load the envelopes in like paper, tell the printer the size of these to set the paper size, then whatever you're using to print on the envelopes, set up the page size the same size as the envelopes. You should then be able to print on envelopes
How to remove printer head on brother mfc 495 cw
1. Unscrew these three 12.1mm screws holding the control panel in place.
2. Lift up the front panel from the device.
3. Before removing the unit, apply 2 or 3 pieces of tape to secure the top and bottom of the unit.
Visit my computer
Brother mfc490cw printer show offline and error
Hello there:
for the document you want to print click on print and your printer should show up now just click on the printer and look down where it says use printer offline and click on it again and than it will say use printer online and just print from there ok please dont forget to rate this solution for me
best regards mike
Brother MFC490cw
Right-click on the printer in the folder and uncheck the "Use Printer Offline" option to place your printer online and available.
Not finding what you are looking for?