20 Most Recent
Canon PIXMA iP4600 Color InkJet Photo Printer - Page 10 Questions & Answers
Printer jammed from top tray
How do you do. The Fault of your printer depends on his(its) period of the usages. It is Difficult to render aid, on stated by you reason. However, in jffen events this occurs the paper by reason of wear-out of the rubber roller of the presenting. In this case, I recommend you carefully to wipe the first rubber roller, which seizes the paper since kase or with hands, wipe the roller by facility for leaving for rubber or facility for cleaning of the polluted surfaces, plastic arts, glass so that rubber became springy. In the second, comes to wear-out platform for presenting the paper, which is under this first roller podachi. her(its) it is necessary to change or arouse to wipe. See, no in node of the presenting the paper stranger subject or breaches to wholeness of the brake platform.Before installing the paper in armor her(its) follows to crease that sheets did not cohere.The Photo paper better to insert on one sheet with hands and little her(its) hold...try , beside you are got. Good luck
Wireless connection for the CANON ip4600
You in a way can but u need to buy a adapter that goes into your modem. apart from that it is possible to sign it into one computer and have it on "share" so that other computers on the same network can still print but for this you need to keep that computer it's connected to on for long periods of time or when you need to use the printer
I can not open ij utility to clean the head
If you hold the resume button until the power light blinks once, it will clean the heads, hold the button for two blinks and it will print a nozzle check print. You may have to download a new driver from canon website.
ERROR6502
Error 6502 is a ink tank position error, one of the contacts for the ink tank in the carriage could be bad, or simply a wrong cartridge installed. You can't use photo magenta in a magenta slot, or photo cyan in a cyan slot.
I want to print on a CD using a Canon Pixma iP4600
hi,
1. to print on a cd, there is a (cd sticker paper) available in the market, buy it and feed it in your printer...
2. to print on a cd, you should have special software such as... Nero Burn version 5.0/5.5/6.0/6.5/7.0,
this is a cd burning software, in this software you will find sticker designing option, where you can
select images or text to design the cd for printing..
Canon PIXMA iP4600 - error 6A80
Hello someone else here had this problem, this is what he posted:
"Same problem with a Canon MP540 fresh from the box. Turned out to be the print head unit was not returning fully to the home position ie extreme right. My Fix : When the scanning unit cover is raised the print head unit moves left for access, look in the vacated area to the right, in particular the small black sponge where the head normally parks. I found a small spring jammed in beside the sponge, removed it and all is well. Don't know what the spring was meant to do but everything is working fine without it.On the MP540 the head unit now glows red, presumably meaning all is well...
"
Waste absorber full
Inkjet printers have a fibrous pad inside them that collects the waste
ink from cleaning the print head. Over time, this pad fills up with ink
and can no longer hold any more. When this occurs, the printer
indicates a "waste ink tank full" error.
Replacing
the waste ink absorption pads is something an authorized canon service
facility can take care of for you. Once they are replaced,
it'll be functional again.
Vista 32 bit with canon pixma ip4600, unable to detect printer
Try adding the printer via the Printers tab under Control Panel.
Click on Add Printer
Select Local Port: USB001(Virtual Printer Port for USB)
Wait for the Next Dialog Box to pop up and select the Have Disk Button.
Then go to where ever you have your driver located I used the one on the CD provided with printer, and follow the bouncing ball so to speak.
Hope this helps.
Seeker
\i would like to replace in k tank but
It sounds like you are turning the power on after opening the covers.
My Pixma at least, centers the print carriage when the power is on and the covers then opened.
Your printer doesn't understand what you want-
How do I fix or reset ink absober full problem on
Reset procedure
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
Not finding what you are looking for?