20 Most Recent
HP Laserjet CM2320nf All-In-One Color Printer - Page 7 Questions & Answers
My HP CM 2320nf is
The document feeder on this printer is extremely delicate and very finicky. I have 8 of these printers and 5 of them exibited the same issue. Open the document feeder and rotate the pickup backward with the green lever. The paper sensor has to be snapped in on both sides. It is the one thing that keeps popping out on all of mine. The sensor is the piece that floats up and down between the gears and has a green flag that lowers the capstan down to contact the paper. Good luck, but I have a feeling these are nothing but the regular old JUNK that hP seems to be pushing on us now...LOL!
We have an HP Color
Hello
Clean the print head nozzles . Right-click the printer icon in the taskbar if using Windows. If using a Macintosh, open the "Applications" folder and select "HP Printer Utility." and click "OK." Select "Head Cleaning." Click "Start." Click "Finish" when the process is complete.
If the printout still has banding, open the Print window on your computer and click on Properties. In the Properties window you can choose the print quality, speed and printer type. Select a higher print quality and a lower speed and make sure the paper type matches the type you are using for the printout.
soak the bottom of the ink cartridge for a few minutes in a mixture of water with 50 percent ammonia added. Dry with a paper towel. Install and test. If this fails, replace the cartridge with a new one.
Finally, check that the ink cartridges are not empty or close to empty and replace them as needed.
Why does my prints blur at the bottom?
try The Print Diagnostic Utility diagnoses and resolves common printing problems and communication problems, including:
If you prefer, you can skip this information and
go directly to downloading the tool
.
-
Connectivity
:
-
USB: Ensures that the USB connection from your computer to the HP product is working correctly.
-
Network:
Ensures that the network connection between your computer and your
network is working correctly. If the tool detects a network connectivity
problem, you will be prompted to run the HP Network Diagnostic Utility
for better results.
-
Spooler
: Automatically restarts the print spooler, which sends print jobs from the computer to the product, if it has been stopped.
-
Online status
: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
-
Device manager
: Checks for problems in Device Manager that would prevent printing.
-
Print queue
: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
-
Port
: Checks the port settings for the HP product.
-
Driver
: Checks for alternate-driver settings.
-
Conflicts
: Checks for conflicts with other drivers, such as other printer brands.
-
Default printer
: Checks the default printer setting and prompts to select the HP product as default (optional).
Hi, We have long ago lost our user guide for the
the software has to be installed in your system. If you dont have it just go to
hp.com and download the full solution. Once you have installed the software you will see the solution center. Just go there and click on scan a document or picture, feed the document in the flatbed or de document feeder then hit scan
Color and black gets shadow on print out
Go to the printer Setup button, hit Ok, then look for Print Quality, acess print quality and go to calibrate colors, run this calibration for 3 times.
Then go to services and run a 2 cleaning modes
You can try printing blank pages selecting "cardstock" as paper type to clean the fuser
Comm Error 283 and 232
These error codes indicate that the Line (Telephone line) reception quality is very poor that the machine couldn't print/receive the full page fax. If i am right, this happens only with a particular number or if you are sending, your line's the problem. Try it after a while and if possible when you think the line's not so busy and improved. You can also try disabling the ECM (Error Correction Mode) by following the steps below:
- Press the < or > button until the front display reads "Fax Setup".
- Press the ENTER/MENU button.
- Press the < or > button until the front display reads "All Faxes".
- Press the ENTER/MENU button.
- Press the < or > button until the front display reads "Error Correction".
- Press the ENTER/MENU button.
- Press the < or > button until the font display reads "Off" and then press the ENTER/MENU button to save the setting. (Off disables ECM and On enables ECM).
Good luck.
Thanks for using
FixYa.
I have been using the
Hi, James, I am online and will help you. The chat session disconnected. let me start help you again. Please start a new chat. You will not be charged extra.
COLOR IS OUT OF ADJUSTMENT
You may have a print cartridge badly installed or running out of toner. Or the paper is too rough for good quality prints. Remove the cartidges and reinstall them. Try a smoother paper.
When I print out color documents the yellow color
sounds like you need to force a calibration cycle. You should be able to find this feature in the print quality menu on the machine. Refer to your manual if you have trouble locating it, or HP online support is very good.
We have a HP colour laser jet CM2320nf MFP and
Check phone line. use a normal phone and plug into the same phone wall socket that the MFP is using, do we have a dial tone? Do we have a noisy line, any buzz or crackel will cause issues
If there is no dial tone ring line supplier, If it is noisy line do the same
Also check phone line is plug into "line" socket in the back of machine not "ext'
Also check no prefix is required to dial out, unit needs its own phone line..
Also try using resolution of fax as standard not fine, this requires less info to go threw the line
In Australia we have a thing called folds (fax online diag service), basicly it is a fax number you ring and the phone company who own the line send back a report, most times the issue is noisy line or no line available
hope this helps
Cheers
Soulvisitor
Not finding what you are looking for?