Brother DCP 165C Compact Color Inkjet Multifunction Printer - Answered Questions & Fixed issues

print unable 4f

The hard drives are in a USB externa enclosure, set up as RAID 1 and are formatted as Mac OS Extended (Journaled). I do not save any TM back ups to them and they work after a restart and then sometime later start to provide the error message anytime I try to save to them. A restart usually fixes the issue for a finite period of time. Disk Utility runs and tells me the disks are fine. I never have trouble accessing data from them. For more help visit cbrtechsolutions

Sir/Madam I suggest You Go to Official Brother Printer trouble Page For You Brother Printer Problem On Below Brother Printer forum URL Link: http://welcome.solutions.brother.com/BSC/public/eu/gb/en/faq/faq/000000/000400/000095/faq000495_033.html?reg=eu&c=gb&lang=en&prod=dcp195c_all&Cat=11 I Hope You resolve Your Brother Printer Issue, OR In case You Need Online Assistance Then follow Us For ON: Brother Printer Support

When you are doing cleaning process many times, You Purge Countergets overflown, You need to be reset the same by some technical rest code required. By pressing - menu -start - menu , Just go in reset counte and reset the same

Manual is here: http://download.brother.com/welcome/doc002242/cv_dcp135_ukeng_usr.pdf Check each of the possible errors listed in turn and try resetting the ink counter.

70 = paper jam or other sensor according to this website: The LCD displays an error code number What does it mean Brother Perhaps when cleaning, some moisture got in a place it shouldn't - let it dry for a while and retry. Here is the brother site to download manual in pdf. Page 85 shows routine maintenance. Read thru those instructions and see where you may have missed something: http://download.brother.com/welcome/doc002377/dcp6690w_ukeng_usr.pdf Best wishes

Well i have found out a perfect way to solve this problem. It worked for me so I'll be hoping it works for you too This is how you have to do it. You need to enable WIA - Windows Image Acquisition. now to do that follow these steps. 1. Click on start or the Window thingy. 2. Type Services or Services.msc in the search part. 3. Now scroll to the following services in the window that got opened. Remote Procedure Call (RPC) DCOM Server Process Launcher RPC Endpoint Mapper Shell Hardware Detection Enable those services. To do so right click on them, click properties and make it automatic. Once you enable all of them start them. After all the services are started scroll for "Windows Image Acquisition" make this automatic too and start it. Just reboot your PC and you should be good to roll :D. Scan all you want :) Problem solved.

The print head circuit or cable is malfunctioning or faulty. Replace the printer. I would suggest the Brother MFC-j450dw/j470dw printer as it is an upgraded and newer version of the j430w. Good luck!

I think you have a scanner issue and need some 20 weight oil on a paper towel and clean the 2 rails and test again

Replace the ink absorber and flushing box and reset their counters

Either head or main board is faulty

maintenance unit faulty

scanner faulty

cOuld be print head or carriage PCB faulty

Automatic

Your print head cannot move. Check for foreign material or if the belt came off, motor not working ...

REMOVE ANY FOREIGN MATERIALS or paper .

sensor is unlock, locate the sensor to close the sensor

Hi,

That error 36 - means "Head/carriage unit travel error" , if the printer is still under warranty, have it serviced. But if its out of warranty try to find any obstacles on the travel path of the head/carriage unit. If you cant find anything, it only means you need to replace some parts.

1. carriage PCB
2. head/carriage unit
3. CR encoder strip
4. carriage motor
5. main PCB
6. power supply PCB
7. maintenance unit

You have to open the scanner as if you were changing the cartridge. There is a "-----;-" cover which hides the flatcable. Remove this cover and reinsert the flat cable to the mainboard by simply sticking it into position. May or may not work, it may have wiggled loose.