20 Most Recent
Samsung WF317AAG Front Load Washer / Dryer - Page 8 Questions & Answers
A02 error code WA456DRHDSU/AA This is the only code Im getting.
I could not find that code applied to a Samsung washer, only different mfgs. Contact with Samsung "Chat" states A02 is a communications error.
Recommend you check cable connections at the control board
Have you tried "smart care" app with this machine? Suggest try and see what it says is wrong.
I need a wiring diagram for model no. WA10F4 Samsung Washing Machine
Most washers will have the service technician guide/wiring diagram information in an envelope attached somewhere inside the machine .... generally behind a panel that is not too hard to remove so the service technician can get to it easily. I am not familiar with your machine so I can not suggest which panel to remove to see if the information is there.I have a link for the manual: https://read-download-books.com/v6/preview/?pid=6&offer_id=355&ref_id=b9167b56d8e059b95b231f9405b2ef5K_d95bfa30_c28f910b&sub1=d95bfa30&keyword=Samsung_Automatic_Washing_Machine_Wa10f4_Manual.pdf&sub8=Samsung_Automatic_Washing_Machine_Wa10f4_Manual.pdf&m=Samsung_Automatic_Washing_Machine_Wa10f4_Manual.pdfGood luck with your troubleshooting...
I have a Samsung WA13SP WIP/XFA top loader. The drain pump broke and it gave an error SE.
You have created a siphon. The end of the drain hose is below the tub of the washer. Depending on how you have the drain hose set up, either pull it out of the drain pipe or check the position in the sink. Carefully adjust the hose so that the end of the hose is still above the washer tub. Note: the hose should be at least about 6" into the drain pipe. You may need to add a coupler and another length of pipe to increase the height of the drain pipe.
I hope this helps.
Cindy Wells
Samsung washing machine. Water is not draining before the spin.
If your washer will not drain or spin then the water level control could either be faulty. Open the washing machine's control panel and look for a plastic tube that is attached to the water level valve. If appears to be clogged clear it out with vinegar. If the valve itself is broken or looks rusty it will have to be replaced and also check the water level control too. The hose could either be clogged or be twisted or have kinks in it or needs to be replaced also.
E4 mean
The Samsung washer error code reads 4E and means problem with the water supply. Please check the water pressure, also check for blocked or kinked water supply hose. You can learn more about all Samsung washing machine error codes in this helpful article:
https://www.justfixed.co.uk/samsung-washing-machine-error-codes/
Hope this is helpful and good luck!
Best,
Dave, Just Fixed
Not finding what you are looking for?