Top 20
Kenmore Elite Oasis 27052 Top Load Washer Questions & Answers
Kenmore Elite Oasis HE Washer #27087. Doing a load
I would think the lid would unlock once you unplugged the machine. Check your owner's manual for any kind of "emergency reset" procedure. Perhaps the lock mechanism is jammed. Have you tried pressing on the lid or tapping it to see if that frees the lock?
I have a oasis HD
Probably tub bearings are worn. You can also take Pump off and look to see if any obstructions are there.
Kenmore Elite Washer Mod 110 27062601 Ser CT
I would still replace the suspension rods and bushings. Not much else it could be if machine is level and clothes are distributed evenly. I also have seen the cabinet weld separate at bottom, so be sure cabinet is secure.
My Kenmore Elite Oasis Ht Top Load washer has a slow drip from the drain pipe. How to stop?
If not during a wash it is standing water.
Remove tube and check for cracks. If so, replace. Does/did the washer "walk"? May have rubbed the discharge tube and caused the leak.
Is the down pipe in a cold external wall? May be condensation from humid air hitting cold.
If the sound is the problem, attach a string to the drain pipe so water drips directly to side of vertical pipe.
Washer turns on but does
Depending on the age of the washer most modern appliances cost more to repair than they are worth.
Your problem sounds like more than a simple filter.
I suggest unplug it, dip the water out of it with a quart cottage cheese cup, then recycle it and purchase a new one.
How do i access the area below my washer basin/tub?
I surely wish I had good news, but most likely you will have to find & pay someone to completely dis-assemble the washer to do this.
If you lived in my area of Florida, I would send you to an older man who knows all there is to know about Kenmore (Whirlpool) washers, and he could tell you if is possible.
Do you have anyone in your area who you could ask?
Specifically, someone who is older, experienced, and works out of their garage, or small workshop.
God bless your efforts.
What does dl code indicate?
Hello. The error code means there is a problem with the door lock. The lock *may* be working correctly but the main board is not getting the indication of lock position(open/closed). Or, the lock may have failed completely--when you initiate a cycle, do you hear the lock engage? Is the door, in fact, truly locked? The lock is really just a simple electro-magnet. When energized, it magnetically pushes or pulls a lever so you can't open the door. Also, it contains the ability to let the main board know when it's safe to start the wash cycle. I hope I helped you!
What does the FE code mean on my washer?
You may have a bad water valve,could be over filling. But. Still could be a drain pump. Does the tub ever fill with water when you are not using? Also too much soap and not using HE. Soap. Can cause this
Not finding what you are looking for?