20 Most Recent Ricoh Aficio SP 100 e Laser Printer - Monochrome - 1200 x 600 dpi Pri Questions & Answers


Now your printer in Service Mode.
It's time to reset the printer.

Ricoh Aficio SP... | Answered on Nov 04, 2016


You are either using the incorrect driver or driver port settings. If this is all correct then you could have a faulty controller.

Ricoh Aficio SP... | Answered on Aug 03, 2016


try to memory clear =)

Ricoh Aficio SP... | Answered on Apr 07, 2016


The exit sensor failed to detect the leading edge of the paper

within the prescribed time and triggered a jam alert.

? After this error has occurred three times, the machine will

shut down automatically and cannot be re-started until the

machine has been serviced by a service technician.

? Check the paper transport path for any physical obstructions

(paper scraps, etc.)

? Make sure the fusing unit has been installed correctly

? After servicing the machine to solve the problem, the service

technician must execute a "Fuser SC Reset". Otherwise, the

machine will continue to issue this SC code and cannot be
operated.

Ricoh Aficio SP... | Answered on Jun 09, 2015


I had the same problem, but solved it.
You have to connect your printer SP210 to your computer.
Search (in Windows) "Smart Organising Monitor Status"
Select Printer (new dialog box)
Click OK (see the error code SC545)
Click on User Tools
Printer Configuration
(Access Code is Admin074)
Find Fuser SC Reset under Maintanance
Click Ok
Close
Restart your printer
Your problem is solved now

OR

Without connecting your printer to Computer (you can do this):

Turn on the printer
Press C (Red colour centre) button once
Enter 107 (nothing will be shown)
Press the Green (Coping) button for 5 seconds
See the Display -->
Select Engine Maintenance
Select Ok
Select Fuse SC Reset (press down arrow - at down you will find it)
Execute (by Pressing the Down Arrow)
Done
Restart your printer.
Your problem should be solved....

Ricoh Aficio... | Answered on Aug 20, 2019


Check its connected to a network, the DHCP server is probably your router if you have a small or home network.
see
http://www.fixya.com/support/t25283562-solve_cannot_connect_dhcp_server_101#solution-section

Ricoh Aficio... | Answered on Jun 29, 2019


Probably, you will have to call your local Ricoh servicer for repair.

Ricoh Aficio... | Answered on Jun 27, 2019


SC 899 is a software error. For example printing from directly from a website. Various printing from websites makes 899 error. Just remove the print queue from the computer and that's it. Make sure you save the file first from the website before you print to avoid same problem.

Ricoh Aficio... | Answered on Jun 03, 2019


Replace Charge corona end blocks

Ricoh Aficio... | Answered on Apr 29, 2019

Not finding what you are looking for?
Ricoh Aficio SP 100 e Laser Printer - Monochrome - 1200 x 600 dpi Pri Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aficio Ricoh

  • Aficio Ricoh

Most Popular Question

ricoh sp100 e7 error message

  • Office Equipment & Supplies
Loading...