20 Most Recent Epic 425 Mx Treadmill EPTL88105 ! - Page 6 Questions & Answers

read number two here http://www.dickssportinggoods.com/product/index.jsp?productId=13025725 EPIC A30T Treadmill

The model # is on the bottom frame member. It begins with EPTL. With that # you will be able to order parts.

Bad touch panel.That's why some work and others dont If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

RUN the software calibration for easy diagnostic and fix it.Go to the HOOD cover motor, and follow the steps , or use the owner manual for follow the steps.God bless you

see the video attached, lube the rollers bearing front+ back very well.2) the input voltage motor, if there are the motor is fault, see my pesonal TIPS.3) test the output of control board for input motor, if there are NOT voltage input for motor, the board is faulty.God bless you

Lube the Deck belt see the video attached. +LUBE too the rollers bearing front+back very well.This happen because the system protect the electronic system2) if the problem persist after you lube, you must test the input voltage for motor, if there are the Motor is faulty. see my personal TIPS3) test the output of the control board, for input to motor, if there are NOT the board is faulty.

please RUN the software calibration inmediately, for easy diagnose and fix it. However adjust the speed sensor, clean it, test for open or fraulty, tight the connector very well.God bless you

Dear Sir: Will be a Great idea that you connect with the next LINK and contact them.http://support.ifit.com/homeor You can download FREE your instr. manual and follow the steps very easy. go to www. fitness.manualsonline.comGod bless you

Hi, follow the instruction below....

• Hold down the "Stop" button, insert the safety key into the console and release the "Stop" button.
• Press the speed increase button to choose mph. An "E" will display representing English measurements.
• Remove the key from the console to exit the information mode.