Epic View 550 Treadmill - Answered Questions & Fixed issues


It is most important that when assembling your system, all parts attached with screws, nuts, and bolts are fully tightened. That is true especially with the hand rails that are affixed to the Front of the platform to the rear. Recheck the motor mount and make certain it is solid. Every unit when assembled should be identical, however, if a part is not true (meaning it is bent, dented, etc.) it may not align 100% and make a noise when the device in in operation.

Epic View 550... | Answered on Jan 13, 2018 | 461 views


Heidi, There will be quite a bit of disassembly required to remove belt, I have attached your manual, which shows an exploded view showing what has to be removed to access rollers and remove belt. you may get away with dissembling/remove front motor cover,remove rear roller and front roller.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://pdfstream.manualsonline.com/d/de84f386-3308-4d84-a2ed-a52898e55aa5.pdf
Treadmill Walking Belt Installation Video by Treadmill Doctor
How To Remove Replace Treadmill Belt and Deck Green Fitness Company

Epic View 550... | Answered on Jul 24, 2016 | 832 views


If you wish to get some derails about treadmill repair then check the below added link
http://electro-medical.blogspot.com/

Epic View 550... | Answered on Jul 07, 2016 | 161 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/

Epic View 550... | Answered on Mar 01, 2016 | 161 views


epic view 550 treadmill video 2 - YouTube

? 2:08
https://www.youtube.com/watch?v=fSIuoh_bZN4
Mar 9, 2010 - Uploaded by Epictreadmillowner
epic view 550 treadmill video 2 ... ICON Canada doesn't really support this and the independant technicians ...Epictreadmillowner 1,181 views.

Epic View 550 Treadmill Review - YouTube

? 3:02
https://www.youtube.com/watch?v=kNiFOcrV9r4
Nov 29, 2012 - Uploaded by Treadmill Review Guru
... .com/epic-treadmill-reviews/epic-view-550-treadmill-reviews-ratings/ ... Nordic track has the track and google maps by i-fit you can download and run anywhere ... The review says it doesn'thave the track/lap but it does.

Epic View 550 Treadmill video 3 - YouTube

? 1:59
https://www.youtube.com/watch?v=YjqgZS-1qlw
Mar 11, 2010 - Uploaded by Epictreadmillowner
Epic View 550 Treadmill video 3. Epictreadmillowner ... I have had 3 different console units, and now the tv doesn't work either!

Epic View 550 Reviews - MyTreadmillReview.com

mytreadmillreview.com/epic-view-550-reviews-2



Epic View 550... | Answered on Jul 07, 2016 | 558 views


You have to lift up the back of the treadmill a little to access 2 phillips head screws that keep the motor cover on, (note that you will also have to unscrew a few phillips head screws on the bottom front of the cover as well in order to remove it completely). Before you begin lifting the back of the treadmill platform off the ground to access the screws underneath make sure the treadmill is on a zero incline setting and it helps to find a sturdy object you can rest the tail end off the treadmill on about 1 to 2 feet above the ground giving you enough room to access the screws underneath. Another option is to lift the treadmill platform all the way up and lock it in an upright position using the locking mechanism and lock handle that is located underneath the machine. I find this route to be unnecessary and cumbersome for what you want to do. Once you lift the treadmill up you will see the 2 small Phillips head screws near the front of the treadmill running platform that you need to unscrew in order to take off the motor cover. You also need to unscrew a couple small screws under the machine located on each side of the wood running board. These screw fasten the top inner plastic side covers onto the top of the running platform which needs to be taken off in order to access the back rollers. Make sure you collect the screws in a way that you will remember where they go later when you reassemble as this is your first time taking them out and you might forget later. Now with the bottom screws out, lower the back of the treadmill down level on the ground and pull off the motor cover, and the Left and Right INNER plastic running platform covers. With the inner covers removed you will find yet another small set of screws fasting the main plastic side covers to the running board which require an allen wrench to unscrew. Use the small wrench that came with the machine if you have it handy. With those off you can pull the main Left and Right plastic running board covers off, just make sure to carefully unsnap them from their snap points near the bottom rear of the machine. With all the covers removed you can now access the bolts that hold your treadmill rollers in place and the drive belt which you will have to slip on and off the motors drive pulley and the front roller using a pull and turn technique. The back rollers are simple and can be removed by unscrewing the tension bolts at the back of the treadmill and pulling the roller through and out of the belt. With drive belt set aside and all roller bolts removed you can take out the front roller in the same way you removed the back roller. Replace the treadmill belt and reassemble the machines components in the reverse fashion you disassembled them using these instructions. Doing this yourself will save you hundreds of dollars service man visits in the future.

Epic View 550... | Answered on Jul 18, 2014 | 235 views


Have you loosened the motor. This is a tricky job. Can be a bit dangerous to your face. Be careful.

Epic View 550... | Answered on Dec 04, 2013 | 44 views


Please post the specific model # found on the model/serial# decal on the frame of the machine (EPTL....)

Who replaced the drive motor on the machine, and for what reason? Did the new motor ever function when installed?

Epic View 550... | Answered on Nov 30, 2013 | 152 views


1) tight the upper and lower connectors and clean it.
2) tight the ribbon cable inside from display board.
3) adjust the reed swith, see the diagram attached.
4) test the power supply for display board +5 or 343cbf29-84cf-46b0-8fce-560ab4e83225.gif12vdc
God bless you

Epic View 550... | Answered on Nov 04, 2013 | 185 views


see the video attached, and follow the step. God bless you

Epic View 550... | Answered on Oct 22, 2013 | 155 views


1) is more easy to fold 2) However if the place is impossible to move you must disassemble the treadmills read your owner manual or download from www.fitness.manualsonline.com see the video attached.
God bless you

Epic View 550... | Answered on Oct 09, 2013 | 659 views


Please Run the utility software calibration for easy diagnostic and fix it.
Go under the Hood cover motor, follow the steps .

God bless you

Epic View 550... | Answered on Oct 09, 2013 | 74 views


Run the utility software calibration for easy diagnostic and fix it.
Go under the HOOD cover motor, and follow the steps

God bless you

Epic View 550... | Answered on Oct 09, 2013 | 72 views


see the video attached and fix it. God bless you

Epic View 550... | Answered on Oct 07, 2013 | 362 views


RUN the software calibration, and test the machine

God bless you

Epic View 550... | Answered on Sep 29, 2013 | 116 views


see the video and fix it. God bless you

Epic View 550... | Answered on Mar 25, 2013 | 171 views


Remove the front cover and check to see if the RED led is solid.
4 x screws on the front and two underneath the belt to the sides.

Epic View 550... | Answered on Dec 12, 2012 | 203 views


adjust the REED swtich, test it for open or faulty, clean it , and tight the plug very well. see the diagram attached.
Plug the ribbon cable for keypads very well, and clean it.
God bless you
12_4_2012_5_44_52_pm.gif12_4_2012_5_45_10_pm.gif

Epic View 550... | Answered on Dec 04, 2012 | 137 views


1) You have problem with LUBE deck belt, this happen because the lack of maintenance, you must lube EVERY week, use 100% silicone lube. Maybe you have WORN deck belt,
2) LUBE the rollers bearing too, use wd-40
3) Test the drive belt motor, see for break, or worn, and replace or tension by 1/4"
4) Test the input voltage motor, if there are the motor need repair. see my personal TIPS for help and troubleshooting.
5) Test the output voltage board, for input voltage motor, if there are NOT the board controllers is faulty. God bless you. see the block diagram attached.

11_26_2012_5_33_39_pm.gif

Epic View 550... | Answered on Dec 24, 2012 | 388 views


HOW TO FOLD THE TREADMILL FOR STORAGEBefore folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may become permanently damaged. Remove the key and unplugthe power cord. CAUTION: You must be able to safely lift45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown bythe arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plastic footrails. To raise the frame, bend your legs, keep yourback straight, and lift with your legs. Raise the frameabout halfway to the vertical position. 2. Raise the frame until the latch knob locks into the storageposition. Make sure that the latch knob is locked in thestorage position.To protect the floor or carpet from damage, place amat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage
position in temperatures above 85 Fahrenheit.

http://www.treadmilldoctor.com/?utm_source=fixya&utm_medium=CPC&utm_campaign=Mendi

Epic View 550... | Answered on Jul 17, 2012 | 549 views

Not finding what you are looking for?
Epic View 550 Treadmill Logo

170 questions posted

Ask a Question

Usually answered in minutes!

Top Epic Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Epic Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...