20 Most Recent Proform Crosswalk 500 Treadmill - Page 2 Questions & Answers

Either your Motor or Motor Control Board(MCB) is faulty. Try testing your Motor with a Drill Battery: 1. Disconnect the machine's power lead from the power socket, so that there is no power to the machine. 2. Open the Motor Hood. 3. Disconnect the Motor + and - leads from the Motor Control Board. 4. Connect + and - leads(normally Red and Black) to the Drill Battery. The Motor should turn the Belt. With the Motor leads disconnected from the MCB, you can connect the machine to the power, Press Start, and if this trips your Fuse Box you know its definitely the MCB. Only carry out these tests if you are competent. Lethal Voltages are present. samsfitnesssolutions.co.uk

Your problem may be as simple as a loose walking belt. It could also be that the belt guides on the underside of the deck is too wide. Ir could also be that your rear roller collapsed (there should be noise in this case) or your rear roller screw is broken or not holding tension for some reason. Try adjusting the belt again. Consider that the belt will move to the side of least resistance so if you tighten the left side the belt will move right and vise versa. Good luck. You can contact Techmotionusa.com if you need phone support or service. Treadmill Repair Fitness Equipment Repair Parts Services Fitness...

Here is a link to the owners manual. If this is correct the fix should be relatively easy


http://www.iconservice.com/pdf/PFCCEX01010.pdf

Gerritt
Serving the Twin Cities

There may be a problem with the LCB or motor. I repair this brand for the distributer in Australia.

please see the video attached. and lube too the rollers bearing front+back. Test the drive belt motor fro crack, tight or replace it.Test the output voltage from control board, for input voltage motor.if there are OUTPUT voltage from control board, this is a o.k the motor is faulty. and viceversa. See my personal TIPS for help.God bless you

Cheryl,Youre looking at 3 possible problems...you need to call for service. If youre anywhere on the east coast contact me.

You can download a free one at iconservice.com.