1) Please LUBE very well the deck belt, with Silicone.
2) Test the thermo switch inside of motor, for overheating.
3) Test with Battery 12 Vdc fro Motor Cycle, for to see if the motor is o.k
4) If everything is o.k the Controller Board Motor is Faulty, the IGTBs is faulty. Replace.
5) See if the walking belt when you lift with his finger has 2-3" otherwise fit with allen screw rear, see the instruction manual how to do it.
Blessing.
Adjust Walking Belt Tension[email protected]
cell+whatsAPP:+50588611441
You must use the Key for started. Or you can use any magnet like the use in the Refrigerator for to put some Paper or similar as Remember you.
Blessing.
Proform Crosswalk 395
If it's happening as soon as you press start then you need a controller and a walking belt. If it's doing it after a few minutes of use then you need to replace your walking belt.
Unfortunately there's nothing you can really do other than replace the entire console. Proform does not sell individual pieces of the console and they aren't made very well so there's no real repair option other than replacing it.
The motor or the motor control board is faulty.
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
You have to check the incline motor and its harness.
If you wish to get some details about treadmill repair ; visit the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
If you wish to get some details about treadmill repair and servcie ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/