Life Fitness 9500HR Next Generation Remanufactured Treadmill - Page 4 - Answered Questions & Fixed issues
I WANT TO CHANGE KILOMETER TO MILE
This is in manager settings. I dont know off hand on the next gen, but on the TI it is hold pause and press clear twice then use arrow keys to navigate. I will check tomorrow and get back.
2/9/2010 2:16:55 AM •
Life Fitness...
•
Answered
on Feb 09, 2010
•
1,364 views
Hi! i have a life fitness 9500HR treadmill and it
Unplug the treadmill . Remove front cover. On the right hand side if you are facing the front - in the siderail is a white switch that tells the treadmill it is all the way down. Check that it is in place and clean.
If you plug the treadmill in.{Do not touch any thing in the motor compartment} When you press start it should go all the way down [home] to contact the switch. You can also see the lit motor turn at this time before the belt will move it must be all the way down.
12/10/2018 9:04:42 AM •
Life Fitness...
•
Answered
on Dec 10, 2018
•
1,211 views
My 9500 next generation treadmill elevation not
Usually its the display panel not sending the proper signal - look under the display panel on the left side if standing on the belt, there is an access opening and there will be 3 plugs or connectors, it is the smaller 2 prong connector, just unplug and replug to clear the connection, that usually fixes mine, while in there unplug and replug all 3 plugs just to be safe.
10/30/2009 7:34:02 PM •
Life Fitness...
•
Answered
on Oct 30, 2009
•
235 views
Manual for free spirit model 30516
it comes from sears , this brand is built in jonesboro ,and is not a top of the line brand but does what most other treadmills do , you can probably go to sears and see if they have a treadmill like your in the showroom and then ask a salesman if the sears service center carries theese manuals or maybe he can tell you where to get one , their is no volume control on theese machines for the beep , but if you locate the sound holes which are most likely on the bottom of the display board you can use a piece of ductape and cover this speaker to make it less noisy ,Hope this has helped ,Sincerely glenn
3/4/2009 5:09:02 AM •
Life Fitness...
•
Answered
on Mar 04, 2009
•
2,497 views
Life Fitness Club Series+ treadmill, miles to kilometers?
Hi Yuri,
Hope so you're doing well, the distance unit from miles to kilometers on the Life Fitness Club Series+ treadmill, there are a few steps you can try before contacting Life Fitness support:
- Warm reset: Press the CLEAR key twice, and then hold down the ENTER key. The treadmill should perform a "warm" reset and beep three times, indicating that the USER MENU has been activated. After the reset, check if you can access the distance unit setting.
- Manual access: Alternatively, you can try holding down the ENTER key while turning on the treadmill. The message "USER MENU" should appear, and after a second, the MESSAGE CENTER will display the first menu item. Navigate through the menu options using the appropriate keys until you find the distance unit setting.
Hope so this will work for you!
Regards,
Bryce June
6/3/2023 7:54:26 PM •
Life Fitness...
•
Answered
on Jun 03, 2023
•
306 views
Lifefitness se3 hang up how can i fix it ?
Sure, here are some steps you can try to fix the issue with your Lifefitness SE3 console:
- Perform a system diagnosis: The Lifefitness SE3 console has a built-in diagnostic tool that can help you identify any hardware or software issues. To access this tool, press and hold the 'Home' and 'Volume Up' buttons for 5 seconds. Then select 'System Diagnostics' from the menu and follow the prompts to perform the diagnosis.
- Check the system logs: The Lifefitness SE3 console logs all system events, which can help you identify the cause of the hang-up. To access the logs, go to the settings menu and select 'System Logs'. Look for any errors or warnings that may indicate a problem.
- Update the BIOS: The Lifefitness SE3 console has a BIOS (basic input/output system) that controls the hardware and software interactions. Updating the BIOS can sometimes fix issues with the console. To update the BIOS, download the latest BIOS firmware from the Lifefitness website and follow the instructions provided.
- Check the storage device: The Lifefitness SE3 console uses an embedded storage device to store data and software. If this storage device is faulty, it can cause the console to hang-up. To check the storage device, go to the settings menu and select 'Storage'. Look for any errors or warnings that may indicate a problem.
- Reinstall the operating system: If none of the above steps work, you may need to reinstall the operating system on the console. To do this, download the latest operating system firmware from the Lifefitness website and follow the instructions provided.
3/22/2023 8:57:51 PM •
Life Fitness...
•
Answered
on Mar 22, 2023
•
110 views
How can I turn down beeping on Life Fitness 95xi elliptical? My wife pedals slowly on it and it's constantly restarting and beeping and beeping and beeping.
To turn down or turn off the beeping on your Life Fitness 95xi elliptical, follow these steps:
- Locate the control panel: The control panel is usually located near the handlebars or on the console of the elliptical.
- Find the sound or beep settings: Look for a sound or beep option in the settings menu.
- Adjust the volume or turn off the beeping: Use the up and down buttons to adjust the volume of the beep, or turn off the beep completely.
- Save the changes: Once you have made the necessary adjustments, be sure to save the changes by pressing the "Save" or "Enter" button.
If you are unable to find the sound or beep settings, consult the owner's manual or contact the manufacturer for assistance. Keep in mind that some beeps are important safety warnings, and disabling them could be dangerous.
2/6/2023 12:48:56 AM •
Life Fitness...
•
Answered
on Feb 06, 2023
•
200 views
Life FItness elliptical model X7 has too much resistance on startup. Prevents use for warming up.
It sounds like the resistance on your Life Fitness X7 elliptical is set too high for the machine to be used effectively as a warm-up tool. There are a few things you can try to adjust the resistance on the machine.
- Check the user manual that came with the elliptical to see if there are any specific instructions for adjusting the resistance.
- Check the resistance settings on the dashboard to ensure that they are set to the correct level.
- Check the resistance adjustment knob or lever to ensure that it is not stuck or jammed in place.
- Check the belt tension on the elliptical to ensure that it is not too tight.
- Check to ensure that there is no debris or dust in the resistance mechanism.
- If the issue still persists after trying the above steps, it may be best to contact Life Fitness technical support or consult a technician for further assistance.
It is also a good idea to inspect the machine overall for any damage or wear.
If all else fails, the used elliptical may have a defect or may not be compatible with your needs. You may need to consider purchasing a new one or a different model for your clients warm-up needs.
1/14/2023 10:34:22 PM •
Life Fitness...
•
Answered
on Jan 14, 2023
•
224 views
Not finding what you are looking for?