Top 20 Coleman Powermate Proforce 2500 Generator - Page 6 Questions & Answers

It would be safer to ring around some spark plug retailers so you don't damage anything.

Diedre go to www.freemanuals.com enter Coleman and your model#.you should find free download. marcus

Try to locate a plug in voltmeter that also measures frequency. set engine speed for 60 hz with moderate load.

http://www.powermate.com/productmanuals.php?cat_id=3

sounds like one of you hot legs in plug or corn getting bad connection

Check the sears parts site with your model number and get a part number, then search with the part number for the best price....

I have experienced the same problem when the generator is "un-loaded". ( It is making no electricity that is being used, nothing is plugged in) When it is loaded, it smooths right out. If yours does this with a load on it, you will need to have the it checked, probably the carburetor rebuilt. God bless your efforts.

recheck doide

You can ask it from your supplier

First, I'm not a Coleman Tech. * First check the generator for a wire(s) output description. This will confirm what each wire is producing and where it should be connected to. * The specs will also give you an idea of what to expect from a particular generator. (Don't expect 220Volts from a 120 Volt small generator.. Hence the 120 VAC generator will only have 3 wires instead of 4 wires for a 220-240 Volt generator. DC/AC generator will have 5-6 wires.) * In general, on/off switch on the electrical part of the generator (the actual electric source) is on once the engine is up and running. Electricity is being produced at this time. The on/off switch is usually the main electrical breaker that is rated for the full output of the generator. This is very similar to your house breakers except for a modification of the hook up terminals used to wire in this safety component. Like most breakers there is an input(s) then output(s). Usually the input lines will be black, white, with an additional green wire that is also connected to the frame of the generator. These three wires will hook up to one side of the breaker or the "Line In" side or "L1,L2" The other side of the breaker should have been hooked up directly to the 1 or 2 duplex (120VAC) outlet panel. * on larger generators that produce 120/240 VAC 1PH (two 120 volt AC outputs with alternative 220-240 volt AC) There will be an additional wire that may be the same or different color IE; 2 Blacks, Reds, or Blues. This is hooked up in similar fashion to the breaker except there will be an additional section to the breaker or even two single breakers stuck together with a bar across both switches. (again similar to a 220 VAC breaker used in a house panel.) The extra wire will go to the 2nd section of the breaker. The other side or "output" of the breaker will be wired directly to a set of Duplex outlets (a pair or 4 outlets) AND a 4 pronged 120/240 1PH outlet "Twist Lock" style. (though you may find specialized outlets for single purpose generators.) * Larger generators may also have a DC (12 or 24 VDC) wire which is of a different color from the AC wires. Expect it to be Black, Red, or White. (Black or white is probably the negative with the Red as positive.) If you do have DC wires then it's more than likely the AC wires are of different colors to avoid getting the DC mixed up with the AC side. * Final; check your warranty. Have your vendor or MFR perform a service and annual maintenance check which is a good idea as they can change out your air and fuel filters. Check and clean the spark plug. Make sure everything is working properly. The peace of mind is worth it. Aloha, ukeboy57

in the end of the fuel line in the tank a small brass filter in the fitting

Go to the Coleman product support website to see if it is available.

Are circuit breakers switched on?

Hello, Allan - If you haven't already thought of calling the Coleman Consumer Service number, I recommend you call them to learn if the company can provide a service manual for your model generator: Call 1-800-835-3278 Monday - Friday: 8:00am - 5:00pm, Central Time Another option is to check with your local public library (maybe the main/headquarters branch) to find out if they hold a service manual for your model of Coleman generator. These days, many public libraries subscribe to electronic databases of all kinds of repair/service manuals for motorized products. Plus, access to the proper database can probably be done from home, through the library home page. Note: You will need a valid library borrower card. If you don't know the number of your local public library to call, use your favorite search engine and this kind of search strategy: "location name, state" "public library". Use the quotation marks as shown. Example: "Beavercreek, Ohio" "public library." If you call the public library, ask to speak with a reference/information librarian. Note: Your public tax dollars at work!

Almost any small engine shop will be able to help you with getting a spark plug for your engine. I buy most of my parts online at Jacks Small Engine. They have a help line if you want to go that route. Nice people. https://www.jackssmallengines.com/jacks-parts-lookup/part/11%20hp%20spark%20lplug

It is probably a fuel related issue. It's most likely not ignition related because it starts and runs for a bit. Clean the carb, make sure gas gets to the carb. Give it another try.

The wattage of a furnace can vary based on the model and its specific features. I couldn't access a manual with this information. Perhaps customer support or a dealer can assist with the informaiton. Contact Us ' Support: Get In Touch With Us ' Coleman® Find a Dealer ' HVAC Systems ' Coleman® (colemanac.com) Have the model number handy.

no idea

Most PowerMate manuals are available here: http://www.powermate.com/productmanuals.php?cat_id=3 . However, describing it as the PowerMate 6250 10 HP generator is insufficient to find the correct manual. The Coleman PowerMate line has several models with 10 HP engines and a 6250 Starting Watt (5000 W running) capacity. These include the Powermate PM0435005; the direct link for this manual is http://www.powermate.com/pdfs/2011/12/29/pm0435005.02.pdf . Please add a comment with the actual model number of your generator if you need further assistance with finding the correct manual for your generator. I hope this helps. Cindy Wells

Try check the exciter bridge rectifier. Diode fault is one of common problem. For some clue where is the diode board,, check it here Powermate PM0435001 Generator Parts