Top 20 Coleman Powermate Proforce 2500 Generator - Page 8 Questions & Answers

take that you mean capacitor( compastor) take the unit to a gen set repair shop and they will have suitable capacitors or will know where to get one

Do you have the model number? https://www.generatorguru.com/coleman-powermate-powermate/ https://www.generatorguru.com/coleman-powermate-powermate

.025"

Defective motor is my guess.

http://www.powermate.com/productmanuals.php?cat_id=3

First check to see if your gen has a tripped GFCI that needs to be reset at the outlet. If it's not a GFCI outlet, it's possible you may have a disconnected or broken wire going to the outlet. You'll need to trace the wiring back to the meter..

https://www.batteriesplus.com/battery/road-equipment/coleman/powermate-pc0555523.01-electric-generator/na/230cca

We are unable to find a manual, but 50:1 usually if it is a 2 stroke.

is the govenor working properly Powermate Powerbase 5000 ER PC0525302 03 User Manual

sounds like a sticking float or clogged needle jet inside the carb. i'm currently working on exactly that same issue

there are natural or lpg operated engines in gen sets being sold currently on the market try talking to a gen set repair /retailer shop to get the make of carby being used on those motors regardless of the engine make , what is required is the engine capacity (CC) so that the correct flow rate for the engine through the carby can be sorted to get the correct carby once the carby is identified , it may be possible to get it from e-bay or a gen set manufacture spares that makes lpg or natural gas gensets

no set length on any recoil repair old one will be stretched or broken melt cord end for ease of fitting and no fraying through holes and finishing knots feed one end into recoil internal through outer and inner casing then knot set recoil spring into correct position and tension cord is at least three times around recoil leave excess cord out for pull handle and later adjustment then cut .. melt end .. feed thought pull handle then adjust as you test recoil off the motor then fit to motor.. pull a few times and final adjustment of cord length at the pull handle

Shut it off, restart. May have condensation. This happened to me with a generac. OH! OH! OH! Check your fuses! Generator will start, but produce nothing MAY just be a fuse.

hope this helps

If its new, SOME generators will not start unless at least 3/4 full of gas. Spark plugs secured all the way in? Gas switch on? Pull the choke? NO MORE starting fluid, Bad Louie, BAD! some of the suggestions i posted above may help :) but, no more starting fluid.

Powermate PM0435001 Manuals

take it to a mower repair shop and have them fix the recoil starter

http://www.powermate.com/productmanuals.php?cat_id=3

30W OIL, take old plug to store customer service will match. Parts: http://www.ereplacementparts.com/powermate-generator-parts-c-117046_130613.html?gclid=COe1kb_yi80CFZGJaQodXvYMXg Info: look on valve cover "DOHC" marked. On the side is the model number for the engine. Search on that model number for engine parts.

# should be on the old plug if not you should be able to match it physically at any hardware store or you can google the model number of the generator and find it.