20 Most Recent
Yamaha RX-V673 7.2-Channel Network AV Receiver - Page 5 Questions & Answers
How to hook up subwoofer for yamaha RX-496 2channels receiver
You need to connect the subwoofer to your receiver using the speaker wire connections on the rear of the receiver. Take the speaker input from the subwoofer to the A or B speaker terminals on the rear of the AV receiver. Then take the speaker outputs from the sub and connect to the main speaker terminals. Really you need to buy a receiver with a sub out to do it properly. Sell this one and buy another.
Yamaha RX-V773 receiver takes long time to warm up before I get sound. The time has increased to over 10 minutes. Any ideas what could be wrong
Hi. I have rxv773 and it had the same problem. If u turn it on and after reley clicking 2 times fast and 1 time after about 8 seconds, look at the display if you see speaker ikons. If u don't see them and there is no sound. You wait those 10 minutes when sound comes back and look if the icons apear at the same time you got sound. If that is the case, you have bad DSP chip inside on the hdmi board. You could open the yamaha cover and see it right away on the top board at the right side. The chip is D80YK113CPTP4. That is the bad one. If you apply a heat for about 20 to 30 seconds with the heat gun at medium settings, you could fix the problem for a day or two or maybe a month. You need to replace the chip with newer one D80YK113DPTP4 . That dptp4 is updatet chip from cptp4. You can find those on aliexpress.
Not finding what you are looking for?