mid Archos M729B Android Tablet - Answered Questions & Fixed issues

The reset button should be on the top of the tablet and it should be silk screend on the back of the tablet as reset

Is it going through a hub/switch. If so, try direct connect.

just make a factory data reset. To reset you tablet manually. you have to 1)switch of your tablet 2)hold volume down button and power button at the same time. 3)wait for 10 sec and you will enter into boot menu. 4)there in the boot menu you will find option named Reset factory default settings/reset user data. select that option 5) wait for resetting...... 6)cheers your done.

Can you tell me where you got the upgraded rom from, and have you tried downloading the firmware from the manufacturer's website? http://www.archos.com/us/support/support_tech/updates_fwm.html

Look on the bottom where the other ports are. The reset button is the tiny hole between the HDMI and headphones jacks. Use a paper clip ti reset. Make sure you feel the click as the button is really small. Cheers Keith

Did a hard reset, but touch screen does not work. Any ideeas???

You will need to perform a factory reset. - Turn off the device and wait 10 seconds. - Press and hold the volume + button while powering on the device. - Keep the volume + pressed until the Recovery mode starts (white screen). - To move from one option to another, use the volume buttons. To select an option, press the ON/OFF button.There should be an option to factory reset or erase your tablet.

You have to plug the iPad into the computer that you originally connected it with. Then you have to "restore iPad to factory settings". This will of course erase all your data but at least you will have your iPad back.

my tablet android 4.0 loading how to sulution this

A bit late but FWIW, I had this problem. I eventually just moved any data I needed to a safe place & fully reset it. To reset, hold the power button & volume up button simultaneously. It should boot to a screen that tells you what to do next. I think they ask you to keep holding the power button for a reset. Do that & you'll see a big old 3D Android figure & a blue progress bar. Give it a minute & it should eventually load. After that I got a screen that said it was "updating" & gave me a percentage countdown. It finally booted like normal to factory settings. All of my data was gone but it now turns on/off like it should.

I have similar problem, my buttons on the right side including yjr start button have slipped inside the case and I can not restart the charged device, Can you help?Pat Green, [email protected], 409-782-2572, thanks if you can help.

i cant ulock tablet forgot password please can you help

Most Android issues are easily fixed by just restarting your tablet/phone/etc.If you get an error message, if it becomes too laggy or anything unusual, restart your device.If you still have the issue, then it may be something more serious!

So you need to be In the main menu interface then press the power button for about 5 seconds to shut it down. Below is the power section out of the manual.1.2 POWER startup: Long Press and hold the power button, the system will enter the main interface shutdown: In the main menu interface, Press the power button about 5 second to shutdown, The system can hint "power off" option, Clike"ok". you can safely shut down. Lock screen: Short press Power button to lock screen or unlock screen. Remark 1.When power is empty,system will shut down automatically. 2.Illegal turn off the device,restart will scan and restore the disk,it may take longer time to enter into system

a new screen would cost around 50$

forgot password on my android tablet m729 4.0 how can we reset it ?

Make sure router is broadcasting a SSID.

Make sure tablet wifi connection settings are set to " ask to join networks".

"rom"? What exactly are you trying to do? Are you referring to ROM as part of the tablet's memory? If yes, you probably will not be able to do it. ROM is a memory chip built onto the circuit board itself inside the tablet. You would need to completely dismantle the tablet to do it. Most tablets are not built to be taken apart for repairs.

Question edited for clarity, add maker. Not a good idea posting your email address as a user name!! This site get 11 million viewers a year including thousands looking for addresses to harvest and spam. We don't email answers, it is all done on the site. You have to turn it off and then hold the buttons. https://www.google.com/search?q=naxa+Nid1070+tablet+reset ..

It is a non-proprietary see through charger as seen here https://www.google.com/search?q=jp5+tablet+charger ..