20 Most Recent Bosch Axxis WFL 2060 Front Load Washer - Page 2 Questions & Answers

My Bosch washer turns "on" and water runs but it does not spin or complete wash. I hear the machine "clicking" as if it is attempting to to function but no spin or full wash cycle.

tranny shot

Somthing like a long nail is jamming it You will need to remove the pump and disassemble it

Check overflow switch at the bottom of the washer

It's a classical error code, you can find all the error codes together with the troubleshooter within the manual under this article: Bosch Axxis Washer Manual

Well, it depends, there are a few solutions to this problem, and you can find most of them in the troubleshooter of the manual under this article: Bosch Axxis Washer Manual

Hello, Welcome to fixya.

The Key symbol means the lock has been activated some how.

Here`s how to deactivate it...

1) Press the "menu" button until you see "CHILD LOCK :ON" appear in the display. ( if nothing is pressed within 10 sec.following this the menu will close and it will default to program in the display )

2) Once you see what I just mentioned in the display press the "select" button until "CHILD LOCK :OFF" appears in the display.

3) Finally by pressing the "start/pause" button the key symbol should disappear confirming you have successfully exited the child lock program.

Let me know if this was helpful to you or not, if so please take a second and rate it accordingly.

Thank you for visiting "fixya" for your washer solution inquiry and good luck going forward.
Regards,

Macmarkus :)

half a cap of liquid laundry detergent

remove the plug remove rear cover and replace the belt

this can be the problem

You can find a PDF copy here: Bosch Classixx 5 Manual