20 Most Recent
Bosch Exxcel WFO 2264 Front Load Washer - Page 3 Questions & Answers
What is error code F18
F18 means the filter is blocked. Look around for a propeller shaped part - it should be able to spin freely. If not, remove the debris so that it is unblocked. Good luck!
The fabric conditioner is not
Take the drawer out and wash it in hot water, use an old tooth brush to clean it out. If that does not cure it there is a small tube and electric valve feeding the water to that compartment and that will be the next thing to look at.
I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply.
My machine is making holes in the clothing! They
Hi, random holes in laundry can be caused if garments are catching in the gap between the drum and door seal and this should not happen under the normal circumstances.
There may be some problem in the inner drum of your washing machine. Like there may be something, where the clothes are getting stuck.
You need the service guys to check it out..
The warning sign of the
Hi
Thanks for using FixYa. From what you have described it seems that the
controls are locked and to unlock you'll need to press and hold the TEMP and
OPTION button for 10-15 seconds. Please accept the solution if the issue is
resolved or post a comment for further assistance.
Thanks
Rylee
I have cleaned conditioner draw and checked pipes
Could be the solonoid valve not working, what to do is pour some water in and see if it drains away without overflowing if it does its a Valve if not then chance is its Blocked some where.....Hope you sort this . please leave me feed back
I have a bosch exxcel 1400 express and a key
check the manual . you can take the key mode off with the instructionsprobably a press and hold for 2-3seconds thing .If you dont have the manual you can get it from thermador. com they will order it for you. you will get it 2-3days. let me know how you made out:)
I have a 6 year old Bosch Exxcel 1100 front loader
it will more than likely be a bra wire caught in the filter it has happened to me twice. you may be able to get to it from the front opening (bottom right) but probably will have to manualy drain it then tip it back as far as it will go safely against something then underneath attached to the rear of the filter and onto the drum is a fat black rubber tube. remove this it is held in place vie a clip and a small star spangled screw once off you should be able to delve in and find your problem good luck
Washer will not empty on tumble
I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer ID doesn't mean
anything to me. It's been about 55 years since I had experience with front load washers. However I can refer you to Applianceaid.com where they have very good and complete trouble shooting and repair information on front loaders. I think you'll find what you need there. Don't worry about the timer, they hardly ever go bad. Good luck with it. If I have helped you, please rate my advice on fixya.
I cannot unscrew the cap next to the draining hose
It IS difficult. Try something to give you greater leverage. I use channel locks, and grab the middle part of he cover. There's an "O" ring behind the cap. When you do get i off, spray the threads and "O" ring with some silicone spray.
Best Regards, --W/D-- Please feel free to rate this solution!
Not finding what you are looking for?