Fender Frontman 212R 100W 2x12 Guitar Combo Amplifier - Page 5 - Answered Questions & Fixed issues

What kind of vehicle is the fender on, and which fender, such as left front, right front, left rear and right rear? Will you do the work, or a body shop? What about paint matching, which is an art in itself?

Authoritative info is scarce. It is probably a DG10 model made in 1995-97. That's as close as I can get. .

Yes, Fender can. Contact Fender Musical Instruments Corporation

For the best answer, contact Fender directly. Here's the link- https://support.fender.com/hc/en-us

Sorry we have no way top look this up here.

Contact Fender Musical Instruments Corporation Contact Fender for the best info

The quickest way, assuming that the guitar is stick, is to check the serial number and contact Fender. Contact Fender Musical Instruments Corporation

Your guitar was made at the Fender Ensenada Plant, Mexico in 2007 - 2008 Production Number: 107383

\That's a 2006 serial number.

I suspect the H is really an N, which would place it.1990-91. As long as the adjustment screw for the truss rod is at the base of the neck. The plugged top end isn't a concern. Your best source of info is to contact Fender customer service directly. Here's the link- Contact Fender Musical Instruments Corporation

Clean first then if it still has a problem replace.

I recommend checking out this site for wiring schemes Wiring Diagrams Seymour Duncan Seymour Duncan

That serial number could be for a guitar was made in Corona California, but it does not give the year, which should be visible on the neck of the guitar. It could be for a guitar made in the Fuji-Gen Japan plant, in 1996-1997, in which case it should show a neck decal "Made in Japan". https://support.fender.com/hc/en-us/articles/212774746-How-can-I-find-out-when-my-American-made-instrument-was-manufactured-

The first number belongs to a Fender made in Fullerton in 1954, so not your guitar since the F-80-12 was introduced in 1976. The nearest we can get with the second number is to a Fender made in Korea sometime from 1988 to 1996. No closer records appear to have been kept. .

Fender is known for having used ash and alder woods in its earlier years, then later on maple. Overseas made Fenders might be agathis wood or basswood, or even laminated wood in cheaper models. It's impossible to say about yours without knowing the model, year, and origin. .

That serial number does not match any Fender scheme, mainly because it has too many digits. If for instance it was only A530222 then it was made at the Fuji-gen Plant (for Fender Japan), Japan in 1985 - 1986. So please check the number.

Those numbers don't correspond with normal Fender numbering schemes. Are there any letters preceding the numbers? Where was the instrument made?

I BELIEVE YOU HAVE A 1977 MODEL GUITAR If you need further help, reach me via phone at https://www.6ya.com/expert/lloyd_4256582adacd68ee

Firstly, it is a Fender Bass, not base (sorry, I'm an old bass player). Yours is a good one, made at the Fender factory in Fullerton USA, in 1968, and is #38173 in that year. Depending on condition it is worth anywhere from $3000-$5000, but you would get lower, silly offers. Keep it, don't sell !! http://www.guitardaterproject.org/fender.aspx https://reverb.com/au/news/how-to-date-a-fender https://reverb.com/au/price-guide/guide/4371-fender-jazz-bass-1968-sunburst .

Check the connection to the reverb tank (rectangular box usually sitting on the bottom of the amp). There are a pair wires that connect it to the amp. If wires are connected, and the reverb is not working, you may need to replace the reverb tank.