20 Most Recent Hunter 21841 The Baseball Fan Ceiling - Page 4 Questions & Answers

To help those on fixya to help you need to put out more info as there are many models of fan's if there's a model number you need to put it up with you're question. for now here is a fan motor that maybe what you need. Take apart you're fan and look at the motor for model tag's and look it up. P.S. most small fan's are simple 3 corded motor's a (+) & (-) & (ground) so if it fit's and you know you're wiring you can make any motor work. just make check that the motor does not take to much current you may end up with a hot cord. (https://www.google.com/shopping/product/434353855398442673?q=Packard+40120+3.3%22+Motor+1/70+HP+1500+RPM+115+Volts+CW+Rotation+Replaces+Fasco+D120+U-14&biw=944&bih=955&prds=paur:ClkAsKraXzwExX1ZNsB8xSlwQ9PWslXeyH_l5TJUjtIfutvOKmltVp3dBEfg7P_Pu1kaFBZAsUzusaROueowhNXYypGxUmZeZPon0URL8Cerg234znoF0QWjGRIZAFPVH71ly_E3B-jJS9_D68DMmYzOBiwlaw&sa=X&ved=0ahUKEwjZk9fH7bDgAhUPJt8KHfoWDrMQxBUInwI)

Replace the battery, if that does not clear problem replace remote and receiver. Receiver is located under ceiling canopy on top of fan unit. Go on line to find replacements and instructions.

check power supply and motor

don't know the device but I would call those switches - toggle switches and I am guessing that whatever you set them too they would have to match the ones set inside the fan and the ones set in the remote. Think of it as a 2 x 4 x 6 x 8 x10 equals 32 possible settings it could be . lets say down/ off = 0 and up/ on =1 try each combination logically 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 0 1 1 0 0 1 0 0 0 0 1 0 1 0 0 1 1 0 0 0 1 1 1 0 1 0 0 0 0 1 0 0 1 0 1 0 1 0 0 1 0 1 1 0 1 1 0 0 0 1 1 0 1 0 1 1 1 0 0 1 1 1 1 1 0 0 0 0 repeat first 16 combinations with first switch set as on

possible bulb failing

Buy another fan with a reverse switch.

Try this; 1 - green 2 - gray 3 - brown L - black Is the switch you have from Hunter or did you buy it off a rack somewhere? The switch could look the same on the outside and be different on the inside. [email protected]

It is available on this link: https://www.ceilingfanswitch.com/product/zing-ear-ze-301d-lampholder/

Hello,Hunter fan usually requires 3 speed pull chain switch which can be found here:https://www.ceilingfanswitch.com/product/zing-ear-ze-268s6/and on/off pull chain light switch, which can be found here:https://www.ceilingfanswitch.com/product/zing-ear-ze-109/Zing Ear ZE-301D with ZE-109M is available on this link:https://www.ceilingfanswitch.com/product/zing-ear-ze-301d-lampholder/

I would assume you can’t if it has no provision for it.

Their website should be able to help.

https://support.hunterfan.com/hc/en-us/categories/115000093973-DIY-Installation-Downrods