20 Most Recent
Cretors Goldrush Popcorn Maker - Page 5 Questions & Answers
Our little league has a Cretors GR6 popcorn
look Just hard wire into place, use a Connector Block, or mounting junction strip. Simply terminate everything safely to this and bypass that plug, if possible, As long as it is done professionally and safe your good to go. Remember to draw it out, and remember the MOST important wire is the Earth.
Stirrer is not turning. Kernels burning
check first the fuse of the motor. if not busted, measure the resistance of the motor using the DMM, digital multi meter. you should get a resistance reading of 100 Ohms to certain Kilo Ohms. if no reading replace the motor. if the resistance is in mega Ohms replace it as well.
Heating element
Google Creators dealer. Most likely there will be one in your area?
Spinner on a Cretors popcorn popper will not work
If when you pick up the kettle to dump it you can spin the agitator in the pan with one hand easy then it is not stuck. check to make sure the motor switch is supplying voltage to the motor. If that is ok now that you have the front panel off look inside to see if the motor is turning but the drive head which comes up thru the pedistal isnt then the motor shaft pin has sheered off. if nothing is moving at all motor needs replacement. the list on those from the factory are over 600 so make sure its bad first.
Not finding what you are looking for?