Panasonic SD-YD250 Bread Maker - Page 8 - Answered Questions & Fixed issues

I had the same issue (got the model as a "Here you take it" gift) and I found out that the National SD-BT55N is identical to the Panasonic SD-BT55P. Here are the patent specs:http://www.patentgenius.com/patent/D357384.htmlCouldn't find the National manual anywhere, but the Panasonic is below:http://www.manualsonline.com/mdownloads/00c31a0d-95e6-dde4-1108-859231df5526.pdf

You may download the manual from here.

You may download a copy of the manual from here.

An easy rule of thumb is to have enough water so that it is about an inch over the level of the rice.

I need a manual for a Panasonic Bread Bakery SD-BT55P

You may download the manual here.

Holding down the start button till the display clears is what normally works for me.

The kneading blade on the Panasonic bread makers is designed to fit loosely. If the dough is 'stiff' the kneading blade may stay in the bread when the loaf is removed from the pan. Allow the bread to cool completely before removing the blade carefully. Some types of flour absorb more water than others, so you can try adding an extra 10 - 20ml of water next time to see if this results in a slightly less 'stiff' dough.This problem can also be caused if crust has built up underneath the blade. Make sure to wash the blade and its spindle after each use.Trust this is helpful. Thank you for using FixYa!

Hey, looking for how to remve th motor for this model to check the belt etc, but came accross this link to the pdf for the manual;http://www.smokingcures.com/bread/Panasonic.Automatic.Breadmaker.SD255.SD254.Operating.Instructions.and.Recipes.pdfHope that helps!Aus

Hi Cathy and welcome to FixYa, I am Kelly
Here are several sources via an image search: (UK)
http://www.google.com/search?q=SD253%20Paddle&rls=com.microsoft:en-ph&oe=UTF-8&startIndex=&startPage=1&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&hl=en&tab=wi

http://www.amazon.co.uk/PANASONIC-Replacement-Breadmaker-TEFLON-KNEADING/dp/B0052XQFHC

Hopefully you can get a replacement via the first link. Something to watch for is that you note the shipping costs. Some sites the shipping is free.

If you need more assistance (i.e nothing above worked for you) respond here and I will help you.
Thanks for choosing FixYa,
Kelly

Click here:

http://www.panasonic.net/

Hope this helps!

To restore the push-button contacts you'll need to press each button many times and very quickly. I suggest that you leave the unit powered up when you do this for then you'll have a tone or display change to confirm your success before moving onto the next button.

Hope this helps!

Hi,
Looks like the thermistor pop up! Thermistor is a fuse protector, protecting ur unit from overheating. In certain (max ) temperature it will cut off the power! It usually looks like a white resistor w/ some label on the side and temp. label
If you have a continuity tester, you could replace it by urself, by opening the bottom of the cooker.
If u have no knowledge wutsoever, a simple eletrician could repair it.

Hope that helps u out!

The proof copy of the Owner's manual includes the specs for the TH-L32EA and is available from: http://www.panasonic.com.au/Support/Customer+support/Downloads+and+documentation . Enter the model number under keywords and then click search (do not use the drop down menus).

Specifications
Power
Power rating AC 220 - 240 V, 50 / 60 Hz 0.33 A
Normal (Home) mode 42 W
Standby condition 0.2 W
Display
panel
Aspect Ratio 16:9
Visible screen size 80 cm (diagonal)
698 mm (W) × 393 mm (H)
Number of pixels 2,073,600 (1,920 (W) × 1,080 (H))
Sound
Speaker 160 mm × 42 mm × 2, 8 Ohms
Audio Output 20 W (10 W + 10 W )
Headphones M3 (3.5 mm) stereo mini Jack × 1
PC signals
VGA, SVGA, WVGA, XGA
SXGA, WXGA ······ (compressed)
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Receiving Systems /
Band name
PAL B/G Reception of Off air broadcasts
Digital TV 7 MHz VHF / UHF (Australia) free-to-air TV broadcast reception
PAL 60 Hz
M.NTSC
NTSC
Playback of NTSC tape from some PAL Video recorders (VCR)
Playback from M. NTSC Video recorders (VCR)
Playback from NTSC Video recorders (VCR)
Aerial - Rear Standard Belling & Lee connector
Operating Conditions Temperature : 0 °C - 35 °C
Humidity : 20 % - 80 % RH (non-condensing)
Connection Terminals
AV1
Input
AUDIO L - R RCA PIN Type × 2 0.5 V[rms]
VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ohms)
COMPONENT Y 1.0 V[p-p] (including synchronisation)
PB/CB, PR/CR ±0.35 V[p-p]
AV2
Input
AUDIO L - R RCA PIN Type × 2 0.5 V[rms]
VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ohms)
AV3
Input
AUDIO L - R RCA PIN Type × 2 0.5 V[rms]
VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ohms)
Audio
Output AUDIO L - R RCA PIN Type × 2 0.5 V[rms] (high impedance)
Others
HDMI1 - 3
Input TYPE A Connectors • This TV supports "HDAVI control 5" function.
PC Input HIGH-DENSITY D-SUB 15PIN R / G / B: 0.7 V[p-p] (75 Ohms)
HD / VD: TTL Level 2.0 - 5.0 V[p-p] (high impedance)
DIGITAL
AUDIO OUT PCM / Dolby Digital, Fiber optic
Card slot SD Card slot × 1
USB 1/2 USB 2.0 TYPE A Connectors DC 5 V, Max. 500 mA
ETHERNET 10BASE-T / 100BASE-TX
Dimensions (W × H × D) 769 mm × 514 mm × 207 mm (With Pedestal)
769 mm × 480 mm × 75 mm (TV only)
Mass 11.0 k Net (With Pedestal)
9.5 k Net (TV only)

(See page 73 of the manual for the specs as a table - I used Proof 2)

I hope this helps.

Cindy Wells

Hi there,

Well you may please follow the link below to find your manual -

http://kitchen.manualsonline.com/manuals/mfg/panasonic/panasonic_microwave_oven_product_list.html

Post the model number of your microwave for specific link.
Good Luck!!

Thanks for using FixYa!!

Hold down the start button till the display goes blank again.

Hi, iadded the flour yeast and water and set the controls for my panasonic SD250 but nothing happens

1. http://www.manualsonline.com/ex/thread/view/idThread/2307402 or
2. http://safemanuals.com/user-guide-instructions-owner-manual/PANASONIC/SD-251-_E

Thank you for using FixYa. The error code H43 refers to an internal water leak. The leak is obviously only a small one or you would have noticed. A small amount of water on a sensor will bring up the error code. A simple solution is- remove the back of the machine after first un plugging it from the electricity and dry up any water then try again.

I hope this has been of some use and would appreciate your "helpfull post" if it has

Thank you

http://service.us.panasonic.com/OPERMANPDF/SDYD250.PDF

All I could find close to that was this model, the SDYD 250.

Please confirm the model number on yours and where the unit was purchased (what country).

Please comment back here to this page and I will try to assist you further.

Thank you.